
- Ana Sayfa
- Prysmian
- Telekom Çözümleri ( Zayıf Akım Kabloları)
- Fiber Optik Kablo Aksesuarları
- Duvar Tipi Sonlandırma Kutuları
22 sonuçtan 1-16 arası gösteriliyor
Ürünler
Features and Benefits
• Unit typically used in large business / residential premises and
can be located in Communications Room / Basement.
• Modular System allows for easy installation and system upgrade.
• Cable management within the unit ensures the minimum bend
radius for optical fibre is not exceeded.
• ‘Plug and Play’ connectors allows for easy tube routing.
• Changeable cable output plate to maximise the flexibility by
allowing a wide range of cable constructions and diameters.
• Low profile ergonomic design.
• Lockable strong Metallic construction for security purposes.
• Brush option available for the inputs and outputs to allow for
easy installation of second phase cables.
• Input gland for cable diameters ranging from 8mm to 13mm
(other sizes available on request).
• Option of single circuit or single element splice trays.
• Splitters can be fitted ranging from 1×2 up to 1×64. These can
be bought as an upgrade or pre-fitted if required.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact wall mounted unit typically used for residential and small
business premises.
• Removable cover fitted with re-enterable seal. Water ingress protection
to IP55.
• Tamperproof cover security screws available as an option.
• Unit manufactured from UV resistant material.
• Standard kit supplied complete with all components necessary to splice an
external cable to four pigtails. For applications where 12 fibres are to be
spliced (external to internal cable), extra splice protectors will be required.
• Rear cable entry port allows pigtails or patchcords to enter the customer
premises, protected by 25mm diameter conduit. An internal Customer
Lead-In Unit (CLI) is supplied to manage the bend radius of the pigtails or
cable at the inside wall, refer to optional items.
• All fibres are positively managed to a 30mm minimum bend radius.
• Cable up to 13mm in diameter can be accommodated with a cable gland.
(diameters of up to 18mm can be accommodated using a cable port
adaptor).
• Cable interstices can be sealed against water/gas ingress at the entry port
if required using a quick set resin (Optional items – Sealing Resin).
• Compatible with Blown Fibre products. Note: for certain applications
where external Blown Fibre tubing is terminated, a Gas Seal connector (not
supplied) will be required to seal the tube. (see additional items).
Technical Data
• Number of Splice Trays: 1
• Maximum Fibre Capacity: 12
• Maximum Cable Diameter (mm): 18
• IP Rating: 55
• Required space envelope (mm): (w) 220 x (h) 150 x (d) 50.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box FR ABS Dark Grey RAL 7030
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact wall mounted unit used for residential, small or large business
premises.
• Removable cover for easy access.
• Tamperproof security screws available as an option (refer to optional
items).
• Unit manufactured from fire resistant UL94-V0 material.
• Single hinged splice tray enables access for working. Tray cover
provides circuit protection and contains fibre ID label.
• Pigtails exit from the bottom of the unit.
• Up to 12 SC type pigtails and adapters can be accommodated. Other
connector types are available on request. Please contact Prysmian for
further information.
• All fibre are positively bend managed to a 30mm minimum bend radius.
• Cables up to 13mm in diameter can be accommodated with a cable
gland. Diameters up to 18mm can be accommodated using a port
adapter supplied. Cables can also enter the unit through the wall.
• If external cable is terminated, cable interstices can be sealed against
the ingress of water/gas at the entry port using a quick set resin
(optional item – Sealing Resin).
• Compatible with Blown Fibre products. Note: for certain application
where external Blown Fibre tubing is terminated, a Gas Seal Connector
(not supplied) will be required to seal the tube (refer to optional items).
Technical Data
• Number of Splice Trays: 1
• Maximum Fibre Capacity: 12
• Maximum Cable Diameter (mm): 18
• Required space envelope (mm): (w) 220 x (h) 150 x (d) 50.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Internal Box FR ABS Light Grey RAL 7035
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Termination Box can be mounted internally or externally and is sealed
to IP54.
• Removable cover for easy access and fitted with a lock for enhanced
security. The unit can be supplied with a keyed lock or a plastic lock
which can be turned with a screwdriver.
• Unit manufactured from UV stabilised fire resistant UL94-V0 material
allowing external installation.
• Single hinged splice tray enables access for working. The splice tray is
supplied interchangeable inserts and can accommodate up to 8 fusion
splice protectors of heat shrink or crimp type, or 8 mechanical splices.
• Customer drop cables (patch cords) exit from the bottom of the unit and
are sealed using a split grommet. Drop cables can also be routed
through the wall.
• Up to 4 SC type pigtails and adapters or 8 LC type pigtails and adapters
can be accommodated. A splice only version is also available.
• All fibre are positively bend managed to a 30mm minimum bend radius.
• External input cable enters the unit from the bottom. Cable up to 11mm
in diameter can be accommodated .
• For Blown Fibre applications a gas block connector can be housed within
the box.
• A knock out is provided in the base of the unit for applications where the
customer drop patch cords are required to be routed through the wall
into the premises.
Technical Data
• Number of Splice Trays: 1
• Maximum Fibre Capacity: 8
• Maximum Input Cable Diameter (mm): 11
• Maximum No. of Input Cables: 1
• IP Rating: 55
• Max Output Cable Diameter (mm): 3.2
• Maximum No. of Output Cables: 8
• Required space envelope (mm): (w) 140 x (h) 185 x (d) 32.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box FR ABS Grey RAL 7030
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Sealing: IP54
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Provides the termination of an optical cable of up to 12 fibres onto an adapter
panel. SC, FC, LC, E2000 and ST connectors can be accommodated.
• Supplied with 6 single circuit splice trays. The splice trays hinge upwards to
provide access to the adapter panel. The box can be supplied with splice trays
for either heat shrink or crimp splice protectors.
• Suitable for both internal and external use. The box is rated to IP55.
• The box has two cable entry ports and one exit port for up to 12 patchcords
or cables.
• Input cables of up to 16mm in diameter can be accommodated. Input cables
are secured and sealed into the box using heatshrink sleeves.
• Output patchcords or cables exit the box through a plastic cable gland. The
gland can be used to secure a 25mm corrugated tube. The corrugated tube is
sold separately in lengths required by the customer. Please refer to addition
items.
• Mechanical cable glands can be supplied instead of heat shrink glands. These
will be fitted by Prysmian depending on the cable diameter. Please contact
the sales desk for further information.
• Lockable to prevent unauthorised access.
• The unit is manufactured from UV resistant material for external use.
Technical Data
• Number of cable entries: 2 in, 12 out
• Maximum cable diameter (mm): 16.0
• Maximum Capacity: 12 Fibres
• Maximum no. of customer feeds: 12
• Required space envelope (mm): (w) 270 x (h) 272 x (d) 100.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Sealing: IP55
• Material: –
• Cover: Polycarbonate
• Base: Polycarbonate
• Splice Trays: PC ABS
• Finsh:-
• Cover: Grey RAL 7040
• Base: Grey RAL 7040
• Splice trays: Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Provides the termination of an optical cable of up to 24 fibres onto an
adapter panel. SC, FC, LC, E2000 and ST connectors can be accommodated.
• Supplied with 12 single circuit splice trays. The splice trays hinge upwards
to provide access to the adapter panel. The box can be supplied with splice
trays for either heat shrink or crimp splice protectors.
• Suitable for both internal and external use. The box is rated to IP55.
• The box has two cable entry ports and one exit port for up to 24 patchcords
or cables.
• Input cables of up to 16mm in diameter can be accommodated. Input cables
are secured and sealed into the box using heatshrink sleeves.
• Output patchcords or cables exit the box through a plastic cable gland. The
gland can be used to secure a 25mm corrugated tube. The corrugated tube
is sold separately in lengths required by the customer. Please refer to
addition items.
• Mechanical cable glands can be supplied instead of heat shrink glands.
These will be fitted by Prysmian depending on the cable diameter. Please
contact the sales desk for further information.
• Lockable to prevent unauthorised access.
• The unit is manufactured from UV resistant material for external use.
Technical Data
• Number of cable entries: 2 in, 24 out
• Maximum cable diameter (mm): 16.0
• Maximum Capacity: 48 splices, 24 terminations
• Maximum no. of customer feeds: 24
• Required space envelope (mm): (w) 270 x (h) 272 x (d) 100.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Sealing: IP55
• Material: –
• Cover: Polycarbonate
• Base: Polycarbonate
• Splice Trays: PC ABS
• Finish:-
• Cover: Grey RAL 7040
• Base: Grey RAL 7040
• Splice trays: Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Features and Benefits
• Provides the termination of an optical cable of up to 72 fibres onto
an adapter panel. SC, FC, LC, E2000 and ST connectors can be
accommodated.
• Supplied with up to 36 single circuit splice trays. The adapter panel
hinges open to provide access to the splice trays. The box can be
supplied with splice trays for either heat shrink or crimp splice
protectors.
• Suitable for both internal and external use. The box is rated to IP66.
• The box has two cable entry ports and one exit ports for patchcords
or cables.
• Input cables of up to 14mm in diameter can be accommodated.
Input cables are secured and sealed into the box using cable glands.
• Output patchcords or cables exit the box through a plastic cable
gland. The gland can be used to secure a 40mm corrugated tube.
The corrugated tube is sold separately in lengths required by the
customer. Please refer to addition items.
• Lockable to prevent unauthorised access.
• The unit is manufactured from UV resistant material for external use.
Technical Data
• Number of cable entries: 2 in, 1 x 40mm duct out
• Maximum cable diameter (mm): 14.0
• Maximum Capacity: 72 Fibres
• Maximum no. of customer feeds: 72
• Required space envelope (mm): (w) 400 x (h) 600 x (d) 200.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Sealing: IP66
• Material: –
• Cover: Polycarbonate
• Base: Polycarbonate
• Splice Trays: PC ABS
• Finish:-
• Cover: Grey RAL 73912
• Base: Black
• Splice trays: Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact and Robust Internal/External wall box.
• Fitted with an integral seal providing a rating of IP55.
• Single circuit versions available for 12, 24 and 36 fibre capacities.
• Single element versions available for 48, 96 and 144 fibre capacities.
• Splice trays hinge upwards for ease of installation and maintenance.
• Lockable hinged lid for extra security.
• Can be supplied to accommodate either heat shrink splice protectors
or crimp splice protectors.
• Cable entry gland sizes range from 13mm up to 20mm.
• Up to 9 cable entry/exit points are provided.
• All fibres are positively managed to a 30mm minimum bend radius.
• Compatible with Blown Fibre products. Note: for certain applications
where external Blown Fibre tubing is terminated, a Gas Seal
connector (not supplied) will be required to seal the tube. (see
additional items).
Technical Data
• Number of Splice Trays: 4, 8 or 12 (single element): 6, 12 or 20 (single circuit)
• Maximum Fibre Capacity: 48, 96 or 144 (single element): 12, 24 or 36 (single circuit)
• Number of cable ports:
• Input cable 1 for cable with max 12.5mm diameter
• Output cables 1 for cable with max 10.5mm diameter, 6 for cable with maximum 3mm diameter
• Maximum Cable Diameter (mm): 12.5
• IP Rating: 55
• Required space envelope (mm): (w) 272 x (L) 270 x (d) 100.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box Polycarbonate
• Splice tray: PC ABS
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Termination Box can be mounted internally or externally.
• Sealed to IP55.
• Removable cover for easy access and fitted with a lock for enhanced
security.
• Unit manufactured from UV stabilised fire resistant UL94-V0 material
allowing external installation.
• Single hinged splice tray enables access for working. The splice tray is
supplied interchangeable inserts and can accommodate up to 8 fusion
splice protectors of heat shrink or crimp type, or 8 mechanical splices.
• Customer drop cables (patch cords) exit from the bottom of the unit and
are sealed using a split grommet. Drop cables can also be routed
through the wall.
• Up to 4 SC type pigtails and adapters or 8 LC type pigtails and adapters
can be accommodated.
•All fibre are positively bend managed to a 30mm minimum bend radius.
• External input cable enters the unit from the bottom. Cable up to
11mm in diameter can be accommodated .
• For Blown Fibre applications a gas block connector can be housed within
the box.
• A knock out is provided in the base of the unit for applications where
the customer drop patch cords are required to be routed through the
wall into the premises.
Technical Data
• Number of Splice Trays: 1
• Maximum Fibre Capacity: 8
• Maximum Input Cable Diameter (mm): 11
• Maximum No. of Input Cables: 1
• IP Rating: 55
• Max Output Cable Diameter (mm): 3.2
• Maximum No. of Output Cables: 8
• Required space envelope (mm): (w) 140 x (h) 185 x (d) 32.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• External Box FR ABS Grey RAL 7030
• Splice tray: FR ABS Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Cabinets are 600mm in width.
• A variety of different heights and depths are available. 6U, 9U, 12U,
15U, 18U and 22U cabinets are available in 450mm depth, and 9U,
15U and 18U cabinets are also available in 600mm depth.
• Can accommodate a range of 19” products including the Prysmian
SRS3000 Splice Only, Patch Only, Splice and Patch and Storage
shelves.
• Sliding 19” mounting rails front and rear.
• Standard ventilation top and bottom. Up to two fans can be fitted to
top and bottom cover for cooling of active equipment. See additional
items.
• Rear panel included.
• Simple one man installation. Supplied completely assembled.
• The door opens 180° right or left hinged.
• Supplied with a lockable door and lockable side panels using the same
key.
• Heavy duty construction
Technical Data
• Dimensions (mm):
• 6U (w) 600 x (d) 450 x (h) 368
• 9U (w) 600 x (d) 450 or 600 x (h) 501
• 12U (w) 600 x (d) 450 x (h) 635
• 15U (w) 600 x (d) 450 or 600 x (h) 767
• 18U (w) 600 x (d) 450 or 600 x (h) 900
• 22U (w) 600 x (d) 450 x (h) 1034
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material: Steel
• Finish: Painted Grey RAL 7035
• Sealing: IP20
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Provides the termination of an optical cable of up to 48 fibres onto an
adapter panel. SC, FC, LC, and E2000 connectors can be
accommodated.
• Supplied with 5 single element splice trays. The box can be supplied
with splice trays for either heat shrink or crimp splice protectors.
• Suitable for both internal and external use. The box is rated to IP66.
• The box has four cable entry ports for input cables of up to 24mm in
diameter. Input cables are secured and sealed into the box using
heat shrinks.
• Output patchcords or cables exit the box through a 40mm plastic
cable gland. The gland can be used to secure a 40mm diameter
corrugated tube. The corrugated tube is sold separately in lengths
required by the customer. Please refer to additional items.
• Each half of the box has its own lockable cover to prevent
unauthorised access.
• Standard colour is RAL7035.
Technical Data
• Number of cable entries: 4 in, 1 x 40mm duct out
• Maximum cable diameter (mm): 24.0
• Maximum Capacity: 48 Fibres
• Maximum no. of customer feeds: 48
• Required space envelope (mm): (w) 400 x (h) 450 x (d) 150.
Note maximum width including fixing brackets is approximately 450mm
Maximum length including glands and fixing bracket = 540mm
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Sealing: IP66
• Material: –
• Cover: Mild Steel
• Base: Mild Steel
• Splice Trays: PC ABS
• Finish:-
• Cover: Painted Grey RAL 7035
• Base: Painted Grey RAL 7035
• Splice trays: Grey RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Stylish and attractive design for internal use.
• Supplied as standard with a base, a cover, top and bottom vented covers
and a lock (keyed or slot). Can also be supplied with a universal plastic
back plate pre-fitted.
• Can be supplied with a keyed lock for security or a slotted lock that can be
opened using a flat head screwdriver for easier access.
• Modular design. Supplied as a single unit, then upgrade boxes can be
purchased to mount above or below the initial box, such that the unit can
be stacked to any required height of boxes.
• Cable entry/exit possible from the bottom, top or rear.
• Front cover can be fitted to hinge to the left or right hand side..
• Provision to fit tailored mounting brackets within the box to enable the
fixing of additional items such as GTU, ONT etc.
• Patch panels can be fitted to accommodate data keystone jacks.
• Unit manufactured from fire resistant UL94-V0 material. Standard colour
white RAL 9016. Other colours available on request.
• Provision to fit a 6 socket electrical distribution board with surge
protection.
• Prysmian can offer to supply the box pre-fitted with any equipment
required. Contact Prysmian for further information.
Technical Data
• Required space envelope (mm): (w) 400 x (h) 307 x (d) 131 (Can be inserted into a wall to a maximum depth of 63mm)
• Internal Dimensions (mm): (w) 365 x (h) 275 x (d) 90 (Depth – 90mm consistent but rises to 110mm in centre).
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:- FR ABS
• Finish: White RAL 9016
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Provides the termination of an optical cable of up to 144 fibres onto an
adapter panel. SC, FC, LC, E2000 and ST connectors can be
accommodated.
• Supplied with single element splice trays and pigtails already installed.
• Suitable for both internal and external use. The box is rated up to IP66.
• The box has four cable entry ports for input cables of up to 24mm in
diameter. Input cables are secured and sealed into the box using cable
glands, which are secured using supplied heat shrink sleeves.
• Output patchcords or cables exit the box through a 40mm plastic cable
gland. The gland can be used to secure a 40mm diameter corrugated
tube. The corrugated tube is sold separately in lengths required by the
customer. Please refer to additional items.
• Each half of the box has its own lockable cover to prevent unauthorised
access. Both locks are supplied to use the same key.
• The standard colour for the box is RAL7035.
• The material of the box is stainless steel painted (The box is made from
304 stainless steel with a powder coated finish).
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Stylish and attractive design for internal use.
• Can accommodate up to a 1×32 splitter for splicing to customer
drop cables.
• The unit is supplied with 17 double tray splice trays. Each
splice tray has a second tray inside it that hinges out for access
providing a total of 34 splice trays for splitter inputs and outputs
(1 customer per tray).
• Supplied as standard with a base, a cover, top and bottom
vented covers and a lock (keyed or slot).
• Cable entry is via the right hand side of the unit. A straight
through riser cable can be accommodated.
• Drop cables exit from the top of the unit. Drop cables of 6mm
can be accommodated.
• Drop cables simply plug in to a push fit manifold providing
excellent retention and full flexibility for fibre routing.
• Can be supplied with a keyed lock for security or a slotted lock
that can be opened using a flat head screwdriver for easier
access.
• Front cover can be fitted to hinge to the left or right hand side.
• Unit manufactured from fire resistant UL94-V0 rated material.
• Standard colour white RAL 9016. Other colours available on
request.
Technical Data
• Maximum No. of splice trays: 34
• Maximum No. of Splitters: 2
• Maximum No. of Splitter Outputs: 32 (e.g. one 1×32 or two 1×16)
• Maximum no. of Drop Cables: 32
• Drop Cable Diameter (mm): 6
• Required space envelope (mm): (w) 400 x (h) 307 x (d) 131
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material: FR ABS
• Colour: White RAL9016
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Cabinet is 600mm in width and 300mm in depth.
• The cabinet is available in three different heights of 380mm,
600mm and 760mm. The usable internal height in units is 6U,
11U and 14U.
• The cabinets have a swing out frame for ease of cable routing
and to provide access to equipment.
• Supplied with 19” mounting rails and can accommodate a range
of 19” products including the Prysmian SRS3000 Splice Only,
Patch Only, Splice and Patch and Storage shelves.
• Simple one man installation. Supplied completely assembled.
• Supplied with a lockable transparent acrylic door, or with a steel
door.
• The cabinet is sealed to IP54.
• Heavy duty construction.
• Painted light grey RAL 7035.
Technical Data
• Height (U): 6, 11 or 14
• Dimensions (mm): 6U: (h) 380 x (w) 600 x (d) 330
11U: (h) 600 x (w) 600 x (d) 330
14U: (h) 760 x (w) 600 x (d) 330
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material:
• Enclosure: Sheet Steel 1.5mm
• Swing Frame: Sheet Steel
• Front Door: Extruded Aluminium and Acrylic (Transparent Door)
Sheet Steel (Steel Door)
• Finish:
• Enclosure: Powder Coated Paint Grey RAL 7035
• Swing Frame: Powder Coated Paint Grey RAL 7035
• Front Door: Anodized, Aluminium Silver (Transparent door)
Powder Coated Paint Grey RAL 7035 (Steel Door)
• Sealing: IP54 to IEC 60-529
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Can be supplied in white or dark grey.
• Each box comes with three double splice trays (6 customer trays) pre-fitted,
and a single element splice tray for spare fibre storage.
• The box is supplied with a Gas/water block connector for use with blown fibre
input cables and a 6-6mm reducer and 3mm transport tube.
• All fibres are positively managed to maintain a 30mm minimum bend radius
within the wall box.
• A unique figure of eight locking system is integrated into the box. This
prevents movement of fibres from aerial input cables when subjected to ice
and wind loading.
• The box is sealed to IP55.
• Splice trays hinge upwards individually, allowing full access to spliced fibres
without disturbance to live fibres in adjacent trays.
•The wall boxes come with everything required to install one input cable and
up to six drop cables (only splice protectors to be ordered separate)
• Storage area inside the box to hold any unused output cable sealing
grommets.
• The boxes are UV stable to prevent discolouration of the material. The boxes
are manufactured from UL94-V0 rated materials.
Technical Data
• Number of cable ports: 1 input, 6 output
• Maximum cable diameter (mm): 18 Input, 3-6 Output
• Maximum number of splice trays: 6 Customer Trays (24 fibre)
1 Single Element Tray (for storage)
• Required space envelope (mm): (w) 220 x (h) 150 x (d) 50.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Box: FR ABS Dark Grey (RAL7030) or FR ABS White (RAL9016)
• Splice trays: FR ABS White (RAL9016)
• Testing:-
• Sealing: IP55
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.