Features and Benefits
• Installation in an underground chamber or direct buried.
• Six splice trays are each able to accommodate 12 spliced fibres.
• Maximum spliced fibre capacity is 72 fibres.
• Between 4 and 16 cable entries dependant on cable diameter.
• Mechanical cable sealing.
• Cable anchor system allows cables to be prepared away from the
joint.
• Continuous addition of branched cables possible for up to 4 cables
per port.
• Reliable sealing of the box using a mechanical gasket allows easy
entry.
• Suitable for direct buried applications.
• Pole and Wall mounting brackets available.
• Earth point for cables metallic parts.

Technical Data
• Number of cable ports: 4 – 16 (depending on diameter)
• Maximum cable diameter (mm): 25
• Maximum number of trays: 6
• Maximum fibre capacity: 72
• Required space envelope (mm): (l) 500 x (w) 160 x (d) 90
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Closure: Glass Filled Nylon
• Splice trays: FR ABS
• Testing:-
• Closure Sealing IP68
• Optical: Tested at 1310nm, 1550nm and 1625nm
• Drop: EN 60068-2-32
• Salt Mist: NF C 20 – 711
• Vibration: EN 60068-2-6
• Shock: EN 50 102

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• The joint can be used for straight, branch spur or tee applications.
• Stainless Steel Base and Cap available in two sizes.
• The closure base has either 4 circular entry ports (2 x OPGW cable and up to
2 x Branch Cables) or 6 circular entry ports (2 x OPGW and up to 4 branch
cables).
• Insulated cable inlet for OPGW cables.
• For each type of trays, splice holders are available for crimp, heat shrinkable
or mechanical (for SEM only) splice protectors.
• All fibres are positively managed to maintain a 30mm minimum bend radius.
• Splice trays hinge upwards individually, allowing full access to spliced fibres
without disturbance to live fibres in adjacent trays.
• Splitter modules can be mounted within the joint and can be supplied preassembled. Any combination of splitters between 1×2 to 1×16 can be
accommodated. Please contact Prysmian for splitter part numbers.
• Cables up to 22 mm in diameter can be installed into each port.
• The joint is quickly re-enterable and the sealing clamp can be locked.

Technical Data
• Number of cable ports: 4 circular (2 x OPGW cable + 2 branch cables) Short Cap
6 circular (2 x OPGW cable + 4 branch cables) Long Cap
• Maximum cable diameter (mm): Ø22 (Ø14.6mm OPGW Cable, Ø22 for Dielectric Cables)
• Required space envelope (mm): (l) 560 x (d) 250 Short Cap
(l) 600 x (d) 250 Long Cap

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Has a capacity of up to 38 splice trays.
• Can accommodate single element splice trays or customer locking splice
trays which contain several tube loops to lock the fibre elements.
• Can accommodate splitters and splitter assemblies (SASA’s).
• Splice trays hinge upwards individually, allowing full access to spliced
fibres without disturbance to live fibres in adjacent trays.
• Contains an oval port and a Loop Storage facility. The oval port can
accommodate cables up to 10mm in diameter. Cables are sealed into the
oval port using resin.
• Contains six circular ports, which can accommodate a 25mm flexible
conduit to protect the incoming blown fibre tubes. The conduit and tubes
are sealed into the ports using resin.
• All fibres are positively managed to maintain a 25mm minimum bend
radius within the joint.
• The Joint is sealed to IP68.
• Supplied in several configurations. Each type is identified by different
colour toggles so there is no need to open the closure to determine which
version is installed. See kit contents and part numbers for the different
configurations.
• For use with Blown fibre tube cables.

Technical Data
• Number of cable ports: 1 Oval (can be used for a Loop), 6 Circular.
• Maximum cable diameter (mm): 10 Oval, a 25mm conduit Circular
• Maximum number of splice trays: 38
• Required space envelope (mm): (w) 210 x (h) 560 x (d) 165.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Base & Cover : Polypropylene (Black)
• Splice trays: FR HIPS (Light Grey)
• Toggles: 20% Glass Filled Polypropylene (Orange, Green, Blue)
• Port Bungs: 20% Glass Filled Polypropylene (Black)
• Testing:-
• Closure sealing: IP68
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Can accommodate an in-line RetractaNet cable from 10mm to 15mm in
diameter.
• Can accommodate two drop tubes / cables of up to 10mm in diameter.
• Easy to install mechanical system using Gel to provide a seal to IP68.
• Suitable for direct buried applications.
• Impact and crush resistant.
• For underground use only.
• Non craft sensitive and reliable.

Technical Data
• Dimensions 190 x 72 x 32 mm
• Colour Black
• Material Polypropylene
• Temperature range:
• Transport and storage -10ºC to +50ºC
• Installation -10ºC to +50ºC
• Operation -20ºC to +60ºC
• Number of Cable Entries: 1 in-line, 2 Drops
• In Line Cable Diameter (mm): 10.0 to 15.0
• Drop Cable Diameter (mm): 6.0 to 10.0
• Fibre bending radius (mm): minimum 15 (ITU-T G.657 A2 fibre)
• Cable retention: 15 mm cable: 350 N
7 mm drop tube: 150 N
• Water immersion: IP68 (No water ingress at 1 meter water pressure for 7 days)
• Impact resistance 10 Nm @ 20 ºC, radius 200 mm
• Crush resistance 1000 N @ 20 ºC on top surface of the box
• Application area Group 1 according to EN 124, placed minimum 25 cm below surface level
Group 2 according to EN 124, placed minimum 30 cm below stone or concrete pavement

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Can accommodate an in-line cable of up to 13mm in diameter.
• Ideal for the Retractanet cable range (with extractable fibre elements).
• Can accommodate four drop cables of up to 9mm in diameter.
• Has a facility to splice and hold 16 splice protectors on a dedicated splice tray.
• Easy to install mechanical system using Gel to provide a seal to IP68.
• The closure can be-re-entered.
• Suitable for cable chamber applications.
•Impact and crush resistant.
• For use underground
• Non craft sensitive and reliable.
• Available in grey or black.

Technical Data
• Number of cable ports: 4 circular and 1 inline port
• Maximum cable diameter (mm): 13mm for the inline cable – 9mm for the drop cables
• Maximum number of splice trays: 1
• Maximum fibre capacity of Joint: 16
• Required space envelope (mm): 220 x 95 x 35mm
• Operating temperature: -25oC to + 70oC (5 to 95% RH)
• Material: Polypropylene
• Colour: Black or Grey
• Testing:-
• Closure sealing: IP68
• Fibre bending radius (mm): minimum 15 (ITU-T G.657 A2 fibre)
• Cable retention: IEC 61300-2-4 [4]

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Universal closure for direct buried, hand hole/manhole, and pole/tower
(ADSS, OPGW) installation.
• Acid proof stainless steel housing for harsh and corrosive environments
without any additional protection.
• High crush and impact resistance.
• Maximum capacity up to 192 splices (XOK 103 series) and 336 splices (XOK
107 series). By extension collars or splice trays for fibre ribbons the capacity
can be increased up to 1000 splices.
• A number of configurations with round and oval cable entry ports.
• A number of configurations suitable for window-cut applications.
• Heat shrink or mechanical type cable entry port seals provide excellent water
tightness and high cable pull out strength.
• Extension collars for extended capacity available.
• Non craft sensitive and reliable.
• Water tight seal to IP68.

Technical Data
• Dimensions (excl. inlet tubes): XOK 103 series: 560 x 230 x 100 mm
XOK 107 series: 560 x 230 x 140 mm
XOK A3 and A4: 560 x 230 x 140 mm
• Inner Diameter of Entry Ports: XOK 103 series: round port 20 mm, oval port 58 x 28 mm
XOK 107 series: round port 27 mm, oval port 58 x 28 mm
XOK A3 and A4: oval port 58 x 28 mm
• Material: Closure: Acid Proof Stainless Steel (AISI 316) 1.5 mm
Closure Seal: Chloroprene Rubber
• Splice Tray Capacity XOK 103 series: 4 trays XOKP 1024/48 with 48 splices each (192 splices)
XOK 107 series: 7 trays XOKP 1024/48 with 48 splices each (336 splices)
XOK A3 and A4: 4 trays XOKP 1024/48 with 48 splices each (192 splices)
• Temperature Variation IEC 60068-2-14; 2 cycles -30°C to +80°C: Δα <0.1 dB@1550 nm • Damp Heat IEC 60068-2-14; + 60°C, RV 93%, 16 h: Δα <0.1 dB@1550 nm • Climatic Withstand Test: IEC 60068-2-14; heat +85°C; RV 93%;16 h: Δα <0.1 dB@1550 nm IEC 60068-2-14; cold -30°C; 16 h: Δα <0.1 dB@1550 nm • Corrosion Test A Sulphur Dioxide: EN ISO 7384, ISO 3231; +40°C; RV saturated; SO2 0,067% by volume; 3x 120 h • Corrosion Test B Salty Mist: IEC 60068-2-52; +35°C; 1000 h • Temperature Range: • Transport and Storage -40ºC to +50ºC • Installation -10ºC to +50ºC • Operation -45ºC to +80ºC • Fibre Bending Radius (mm) Minimum 30 mm • Cable Retention IEC 60794-1-E1: 1000 N • Water Immersion IP68 (No water ingress at 1 meter water pressure for 7 days) • Impact Resistance IEC 60794-1-E4: 30 Nm @ 20 ºC, radius 300 mm • Crush Resistance 1000 N @ 20 ºC on top surface of the box • Torsion Resistance IEC 60794-1-E7: 1000 mm length, ± 180°: Δα <0.1 dB@1550 nm • Drop Drop height 5 meters on concrete: Δα <0.1 dB@1550 nm • Application Area Group 1&2 in accordance with EN 124, 30 cm below surface level Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Metallic closure units for OPGW with Aluminium tube construction and/or
optical cables with central tube construction.
• Acid proof stainless steel housing for harsh and corrosive environments
without any additional protection.
• High crush and impact resistance.
• Maximum capacity up to 192 splices.
• Gland type cable entry port seals provide excellent water tightness and high
cable pull out strength.
• Non craft sensitive and reliable.
• Water tight seal to IP68.

Technical Data
• Dimensions (excl. inlet tubes) 560x230x100 mm (L x W x H)
• Inner diameter cable entry ports Cable diameter max 21 mm; cable core diameter max 10,5 mm
• Number of entry ports 2
• Weight about 10 kg
• Material Closure: Acid proof stainless steel (AISI 316) 1.5 mm
Closure seal: Chloroprene rubber
• Splice tray capacity 4 trays XOKP 1024/48 with max capacity of 48 splices/tray
• Temperature variation IEC 60068-2-14; 2 cycles -30°C to +80°C:  <0.1 dB@1550 nm • Damp heat IEC 60068-2-14; + 60°C, RV 93%, 16 h:  <0.1 dB@1550 nm • Climatic withstand test IEC 60068-2-14; heat +85°C; RV 93%;16 h:  <0.1 dB@1550 nm IEC 60068-2-14; cold -30°C; 16 h:  <0.1 dB@1550 nm • Corrosion test A sulphur dioxide EN ISO 7384, ISO 3231; +40°C; RV saturated; SO2 0,067% by volume; 3x 120 h • Corrosion test B salty mist IEC 60068-2-52; +35°C; 1000 h • Temperature range: • Transport and storage -40ºC to +50ºC • Installation -10ºC to +50ºC • Operation -45ºC to +80ºC • Fibre bending radius (mm) minimum 30 mm • Cable retention IEC 60794-1-E1: 1000 N • Water immersion IP68 (No water ingress at 1 meter water pressure for 7 days) • Impact resistance IEC 60794-1-E4: 30 Nm @ 20 ºC, radius 300 mm • Crush resistance 1000 N @ 20 ºC on top surface of the box • Torsion resistance IEC 60794-1-E7: 1000 mm length, ± 180°:  <0.1 dB@1550 nm • Drop Drop height 5 meters on concrete:  <0.1 dB@1550 nm • Application area Group 1&2 in accordance with EN 124, 30 cm below surface level Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• An ultra compact closure for the splicing of optical cables.
• Supplied with 12 single element trays each able to accommodate 12
splices providing a maximum capacity of 144 fibres, or 12 single circuit
splice trays. Each single circuit splice tray has two storage sections
providing a total of 24 trays per joint. Each tray can accommodate up to
4 splices providing a total capacity of 96 fibres.
• An input manifold manages the tubes to a common routing channel and
has the provision to mount up to four optical splitters.
• The joint is for use with heat shrink splice protectors of either 1.3mm in
diameter and 30mm in length or 2.2mm in diameter and 45mm in length.
• The closure base has 4 circular entry ports and an oval port. Cables up
to 23mm in diameter can be installed into each port. A further two small
ports are available as emergency ports. These ports are for heat shrink
entry and can accommodate a cable of up to 12mm in diameter.
• Circular port cables are sealed using a mechanical sealing gland. The
gland can be assembled onto the cable away from the joint and is then
simply plugged into the base.
• Oval port cables are sealed using adhesive lined heat shrink sleeves or
using a mechanical oval port entry kit. See page 3 for more information.
• Multi Way Entry Glands are available to allow the installation of a number
of cables into one circular port. See page 3 for more information.
• Splice trays hinge upwards individually, allowing full access to spliced
fibres without disturbance to live fibres in adjacent trays.
• Integrated loop storage basket for mid-span applications.
• Can be supplied with a pole/wall mounting bracket.
• Can be supplied with a pressure test valve for both flash testing and
cable earthing.

Technical Data
• Minimum Fibre Bend Radius (mm): 30 (Note: The input manifold contains mandrels to cross fibres from one side of
the stack to the other. These are limited to 20mm radius if used).
• Number of Cable Ports: 4 circular and 1 oval (also contains 2 additional small emergency ports)
• Cable Diameter Range (mm):
• Circular Port: 4 to 23
• Multi Port (in circular port): 5 to 7 (4 Way), 3x2mm flat cable (8 Way), 5 to 9 (2 Way)
• Oval Port: 7 to 21 (Heat Shrink), 5 to 14.8 (mechanical)
• Emergency Port: 4 to 12
• Cable Retention (N):
• Circular Port: > Cable (Ø/45) x 1000N with central strength member secured.
• 4 Way Multi Way (in circular port): > 150N for cables with Aramid yarns, > 30N for cables without Aramid yarns
• Maximum number of splice trays: 12 Single Element
12 single Circuit Double Trays (each tray has two storage area so 24 trays total)
• Maximum fibre capacity of Joint: 144 Single Element
96 Single Circuit
• Splitter capacity: 4 optical splitters of 4mm x 4mm x 60mm
• Required space envelope (mm): (l) 305 x (w) 231 x (d) 164
• Operating temperature: -40oC to + 70oC (5 to 95% RH)
• Material:-
• Cap: GF Polypropylene
• Base: GF Polypropylene
• Clamp: GF Nylon
• Splice Trays: FR ABS
• Testing:-
• Closure Sealing: IP68 (5 metres) (IEC 61300-2-23)
• Optical: Tested 1310nm,1550nm and 1625nm
• Change of Temperature: IEC 61300-2-22
• Dry Heat: BS EN 60068-2-2 Test Bb
• Damp Heat: IEC 60068-2-3: 1969
• Vibration: IEC 61300-2-1
• Torsion: IEC 61300-2-5
• Bending: IEC 61300-2-37
• Impact: IEC 61300-2-12
• Cable Retention: IEC 61300-2-4
• Crush Resistance: IEC 61300-2-10

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.