Prysmian
7
You are here:
42 sonuçtan 33-42 arası gösteriliyor
Ürünler
Features and Benefits
• Compact, low profile, wall mounted unit typically used in multi
dwelling units.
• Unit manufactured from fire resistant material to UL94-V0.
• Supplied with all of the components required to secure an inline Verticasa cable into the unit.
• Can accommodate Verticasa cables of up to 9mm in diameter.
• Can take out 8 drop tubes of 3mm in diameter or 2 drop tubes
of 5mm in diameter.
• Can be supplied to accommodate drop tubes of 3mm and 5mm
in diameter.
• It’s possible to reduce the length of the part by removing the
top section using a pair of pliers.
• Standard colour is white RAL9016. Other colours are available
on request. Please contact the Prysmian sales desk.
Technical Data
• Max number of input cables: 1 in-line
• Max diameter of in-line cable (mm): 9
• Max number of 3mm drop tubes: 8
• Max number of 5mm drop tubes: 2
• Tube Retention: > 50N
• Cable Retention: > 50N
• Required space envelope (mm): (h) 71 x (w) 40 x (d) 20
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material: FR ABS
• Colour: White RAL 9016
• Flammability rating: UL94-V0
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Allows splicing from cables to cables.
• It is suitable for one inline cable of up to 9mm in diameter.
• Up to 6 drop cables of 2.6mm in diameter can be spliced to the in-line cable.
• The compact dimensions 70 x 50 x 25mm allow the unit to be installed in the
network where access is restricted: e.g. back box, riser, duct, etc…
• The cable entries are suitable for cables with 2.6 mm OD.
• Up to 6 fusion splices or can be accommodated into the splice tray.
• Cable management within the unit ensures the minimum 15mm bend radius
for optical fibre is not exceeded.
• Easily installed and fitted to the wall or inside a riser or back box.
• Input/output cables are secured at the cables entry levels.
• Unit manufactured from fire resistant UL94-V0 rated material.
• The standard colour is White RAL 9016. Other colours are available on
request.
Technical Data
• Maximum number of splices: 6 fusion
• Number of cable ports: 1 Input Cable – 6 Output Cables
• Maximum Input cable diameter (mm): 9.0
• Maximum Output cable diameter (mm): 2.6
• Required space envelope (mm): (L) 70 x (W) 50 x (D) 25
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material Internal Unit:-
• Cover: FR ABS – White RAL 9016
• Base: FR ABS – White RAL 9016
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Eliminates the need for splicing in the customer premises.
• The Compact Termination box is pre-terminated in the factory to a length
of cable using SC/APC connectors.
• The cable is for use internally or externally.
• The standard cable lengths available are 50m or 100m. Other lengths can
be supplied. Contact Prysmian for further information.
• The standard cable type supplied is a 6.0mm diameter with a HDPE sheath.
It contains up to four G657A2 fibres. Other cable types can be supplied.
Contact Prysmian for further information.
• Compact & attractive designed termination box for interior wall mounting.
• Supplied with a bracket that enables the box to be mounted to the wall
without removing the cover.
• All fibres are positively managed to maintain a 20mm minimum bend
radius inside the CTB.
• Termination Box manufactured from fire resistant UL94-V0 rated material.
Cable sheath is HDPE.
• Patchcords exit the termination box on the bottom face and are protected
by the use of shuttered adapters.
• The standard termination box colour is white RAL9016.
• Fully tested in the factory. Each box is supplied with data for insertion loss
and return loss for each connector.
Technical Data – Termination Box
• Maximum Capacity: 4 Fibres
• Maximum no. of customer feeds: 4 Patchcords
• Required space envelope (mm): (l) 83 x (w) 100 x (d) 27
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material: FR ABS
• Colour: White RAL9016
• Testing:-
• Optical: Tested 1310,1550 & 1625nm
• Transportation: FT/RD/RESA/09/11/213 – 3.3
• Installation: FT/RD/RESA/09/11/213 – 3.4
• Climatic Storage: FT/RD/RESA/09/11/213 – 3.8
• Impact: FT/RD/RESA/09/11/213 – 3.8
• Cover Resistance: FT/RD/RESA/09/11/213 – 3.10
• Tensile: FT/RD/RESA/09/11/213 – 3.12
• Torsion: FT/RD/RESA/09/11/213 – 3.13
• Insertion Loss: FT/RD/RESA/09/11/213 – 3.14
• Climatic Testing: FT/RD/RESA/09/11/213 – 3.15
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact & attractive design for interior wall mounting. Standard colour is
white RAL9010.
• On the front main cover a flip cover is available for an identification label.
• Removable main cover for easy access.
• Cables can enter unit from rear, bottom, top, right hand side or left hand side.
• Cables are fixed with dedicated combs, without the use of tie raps.
• Flip splice tray to allow access to pre-terminated tails and cable entry.
• Up to four G.657.A2 fibre 900 microns pigtails can be supplied as standard.
The pigtails are already stripped inside the slice tray. All fibres are positively
managed to maintain a 15mm minimum bend radius.
• On the splice tray, a bay is suitable for up to 4 fusion splices.
• Patch cords exit the unit on bottom face and are protected by the use of
inner-shuttered adapters.
• Supplied with a bracket for wall mounting (with screws or double face tape),
for embedded electrical junction box or for mounting directly onto a DIN Rail.
• When configured for one fibre, the CTB MK3 can accept a field mounted
connector.
• Can be supplied on a reel with a pre-installed stub of cable for direct mounting
without the need to open the box. Please check the following data sheets:
WM072 pre-terminated CTB MK3 kit for internal cables.
WM073 pre-terminated CTB MK3 kit for external cables.
Technical Data
• Maximum input cable diameter(mm) : 5 mm
• Number of input cable port: 1
• Maximum Capacity : 4 connectors type SC and 4 splices
• Dimensions (mm) : (l) 80 x (w) 80 x (d) 28
• Operating temperature : from -25 to +70°C
• Material/Color : ABS / White RAL9010
• Testing specification : FT_RD_WTC_14_03_70
• SC/APC 900 microns Pigtail : Fibre G.657.A2.
• inner-shuttered adapter type : SC/APC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The CTB MK3 has a compact & attractive design for interior wall mounting.
Standard color is white RAL9010.
• Eliminates the need for splicing in the customer premises.
• On the front main cover a flip cover is available for an identification label.
• Removable main cover for easy access.
• The CTB MK3 is pre-terminated in the factory to a length of cable using
SC/APC connectors. Fully tested, each box is supplied with data for insertion
loss and return loss for each connector.
• The standard cable lengths available are 30m or 50m. Other lengths can be
supplied. Contact Prysmianv for further information.
• The «pull» type cables (L1082-x or L1088-2) for duct installation or direct to
the wall installation are LSOH, have a 4 mm nominal diameter, can contain
from one to four fibres BendbrightXS (G.657.A2) in a 900 microns buffer,
SC/APC pre-terminated.
• The «push» type cables (L1087-xR) for duct installation are LSOH, have a 2,7
mm maximum diameter, can contain from one to four fibres BendbrightXS
(G.657.A2) in a 900 microns buffer, SC/APC pre-terminated. All the
accessories needed to push the cable are supplied within the kit.
• Cables can enter unit from rear, bottom, top, right hand side or left hand side.
• All fibres are positively managed to maintain a 15mm minimum bend radius.
• A splice tray is available when maintenance is needed, for up to 4 fusion
splices.
• Patch cords exit the unit on bottom face and are protected by the use of
inner-shuttered adapters.
• Supplied with a bracket for wall mounting (with screws or double face tape),
for embedded electrical junction box or for mounting directly onto a DIN Rail.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The CTB MK3 has a compact & attractive design for interior wall mounting.
Standard color is white RAL9010.
• Eliminates the need for splicing in the customer premises.
• On the front main cover a flip cover is available for an identification label.
• Removable main cover for easy access.
• The CTB MK3 is pre-terminated in the factory to a length of cable using
SC/APC connectors. Fully tested, each box is supplied with data for insertion
loss and return loss for each connector.
• The standard cable lengths available are 50m or 100m. Other lengths can be
supplied. Contact Prysmian for further information.
• The internal/external cable type (L1083-x) has 6mm nominal diameter. It
contains from one to four fibres BendbrightXS (G.657.A2) in a 900 microns
buffer, SC/APC pre-terminated. The cable has a external HDPE sheath that can
be pilled to continue the installation, without interruption, with the internal
LSOH sheath inside the premises. The cable can enter unit from rear, bottom,
top, right hand side or left hand face.
• The external cable type (L1084-x) has a 5mm nominal diameter, HDPE
sheath. It contains from one to four fibres BendbrightXS (G.657.A2) in a 900
microns buffer, SC/APC pre-terminated. The cable can enter unit from the
bottom face.
• All fibres are positively managed to maintain a 15mm minimum bend radius.
• A splice tray is available when maintenance is needed, for up to 4 fusion
splices.
• Patch cords exit the unit on bottom face and are protected by the use of
inner-shuttered adapters.
• Supplied with a bracket for wall mounting (with screws or double face tape),
for embedded electrical junction box or for mounting directly onto a DIN Rail.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The HCTB has a compact & attractive design for interior wall mounting. Standard
color is white RAL9010.
• Eliminates the need for splicing in the customer premises.
• On the front main cover a flip cover is available for an identification label.
• Removable main cover for easy access.
• The HCTB is pre-terminated in the factory to a length of cable using SC/APC
connector. Fully tested, each box is supplied with data for insertion loss and return
loss for each connector.
• The standard cable lengths available are 30m or 50m. Other lengths can be
supplied. Contact Prysmian for further information.
• On the front face, the HCTB can also accept through the Keystone port:
a female connector (type 9.52) TV antenna cable
a male connector (Type F) for satellite cable
a male connector (Type RJ45) CATx for Ethernet networks.
This feature allows to use the same existing duct to install the optical
cable together with the already installed copper cable.
• The «pull» type cable (L1082-1) for duct installation or direct to the wall
installation are LSOH, have a 4 mm nominal diameter, contains one fibre
BendbrightXS (G.657.A2) in a 900 microns buffer, SC/APC pre-terminated.
• The «push» type cable (L1087-1R) for duct installation are LSOH, have a 2,7 mm
maximum diameter, contains one fibre BendbrightXS (G.657.A2) in a 900 microns
buffer, SC/APC pre-terminated. All the accessories needed to push the cable are
supplied within the kit.
• Cables can enter unit from rear and bottom side.
• All fibres are positively managed to maintain a 15mm minimum bend radius.
• Patch cord exits the unit on bottom face and is protected by the use of innershuttered adapters.
• Supplied with a bracket for wall mounting (with screws or double face tape), for
embedded electrical junction box.
Technical Data
• Maximum input cable diameter(mm) : 5 mm
• Number of input cable port: 1
• Maximum Capacity : 1 connectors type SC
• Key stone port : 1 suitable for a female connector (type 9.52) TV antenna cable or a male
connector (Type F) for satellite cable or a male connector (Type RJ45) CATx for
Ethernet networks.
• Dimensions (mm) : (l) 80 x (w) 80 x (d) 25
• Operating temperature : from -25 to +70°C
• Material/Color : ABS / White RAL9010
• Testing specification : FT_RD_WTC_14_03_89 v2
• Inner-shuttered adapter type : SC/APC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The CB CTB has a compact design for DIN rail mounting, ideal for a use inside
a communication board or a home hub. Standard color is white RAL9010.
• Eliminates the need for splicing in the customer premises.
• On the front face, the cover contains a cut out for a label to be inserted and a
further transparent cover is supplied to fit over the label.
• The CB CTB is available in two formats:
• 1U unit suitable for up to two fibres with SC/APC adaptors.
• 2U unit suitable for up to four fibres with SC/APC adaptors.
• The CB CTB is pre-terminated in the factory to a length of cable using SC/APC
connectors. Fully tested, each box is supplied with data for insertion loss and
return loss for each connector.
• The standard cable lengths available are 30m or 50m. Other lengths can be
supplied. Contact Prysmian for further information.
• The «pull» type cables (L1082-x or L1088-2) for duct installation or direct to
the wall installation are LSOH, have a 4 mm nominal diameter, can contain
from one to four fibres BendbrightXS (G.657.A2) in a 900 microns buffer,
SC/APC pre-terminated.
• The «push» type cables (L1087-xR) for duct installation are LSOH, have a 2,7
mm maximum diameter, can contain from one to four fibres BendbrightXS
(G.657.A2) in a 900 microns buffer, SC/APC pre-terminated. All the
accessories needed to push the cable are supplied within the kit.
• Cables enter unit from the bottom side.
• All fibres are positively managed to maintain a 15mm minimum bend radius.
• The CB CTB can be opened for maintenance purposes.
• Patch cords exit the unit on bottom face and are protected by the use of
inner-shuttered adapters.
Technical Data – CB CTB
• Maximum input cable diameter(mm) : 5 mm
• Number of input cable port: 1
• 1/2 CB CTB Maximum Capacity : 2 connectors SC type
• 1/2 CB CTB Dimensions (mm) : 1U (l) 90 x (w) 50 x (d) 18
• 4 CB CTB Maximum Capacity : 4 connectors SC type
• 4 CB CTB Dimensions (mm) : 2U (l) 90 x (w) 50 x (d) 36
• Operating temperature : from -25 to +70°C
• Material/Color : ABS / White RAL9010
• Testing specification : FT_RD_WTC_14_04_16 v2
• Inner-shuttered adapter type : SC/APC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The CB CTB has a compact design for DIN rail mounting, ideal for a use inside
a communication board or a home hub. Standard color is white RAL9010.
• Eliminates the need for splicing in the customer premises.
• On the front face, the cover contains a cut out for a label to be inserted and a
further transparent cover is supplied to fit over the label.
• The CB CTB is available in two formats:
• 1U unit suitable for up to two fibres with SC/APC adaptors.
• 2U unit suitable for up to four fibres with SC/APC adaptors.
• The CB CTB is pre-terminated in the factory to a length of cable using SC/APC
connectors. Fully tested, each box is supplied with data for insertion loss and
return loss for each connector.
• The standard cable lengths available are 50m or 100m. Other lengths can be
supplied. Contact Prysmian for further information.
• The internal/external cable type (L1083-x) has 6mm nominal diameter. It
contains from one to four fibres BendbrightXS (G.657.A2) in a 900 microns
buffer, SC/APC pre-terminated. The cable has a external HDPE sheath that can
be pilled to continue the installation, without interruption, with the internal
LSOH sheath inside the premises. The cable can enter unit from bottom face.
• The external cable type (L1084-x) has a 5mm nominal diameter, HDPE
sheath. It contains from one to four fibres BendbrightXS (G.657.A2) in a 900
microns buffer, SC/APC pre-terminated. The cable can enter unit from the
bottom face.
• All fibres are positively managed to maintain a 15mm minimum bend radius.
• Patch cords exit the unit on bottom face and are protected by the use of
inner-shuttered adapters.
Technical Data – CB CTB
• Maximum input cable diameter(mm) : 5 mm
• Number of input cable port: 1
• 1/2 CB CTB Maximum Capacity : 2 connectors SC type
• 1/2 CB CTB Dimensions (mm) : 1U (l) 90 x (w) 50 x (d) 18
• 4 CB CTB Maximum Capacity : 4 connectors SC type
• 4 CB CTB Dimensions (mm) : 2U (l) 90 x (w) 50 x (d) 36
• Operating temperature : from -25 to +70°C
• Material/Color : ABS / White RAL9010
• Testing specification : FT_RD_WTC_14_04_16 v2
• Inner-shuttered adapter type : SC/APC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The EC is pre-terminated in the factory to a length of cable using SC/APC
connector. Fully tested, each box is supplied with data for insertion loss and
return loss for each connector.
• The standard cable length available is 40m. Other lengths can be supplied.
Contact Prysmian for further information.
• The «push» type cable (L1087-1R) for duct installation is LSOH, have a 2,7
mm maximum diameter, contain one fibre BendbrightXS (G.657.A2) in a 900
microns buffer, SC/APC pre-terminated. All the accessories needed to push the
cable are supplied within the kit.
Technical Data – Fibre Termination
• Connector type: SC/APC
• Insertion lost (IL) @ 1310nm and 1550nm : ≤0,35dB.
• Return lost (RL) @ 1310nm and 1550nm : ≥60dB.
• Nominal connector angle SC/APC : 8°
• Operating temperature : from -25 to +70°C
• Testing specification : FT/RD/RESA/06/04/253
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.