You are here:
10 sonucun tümü gösteriliyor
Ürünler
Features and Benefits
• Used for connecting two pieces of DB1 Blown Tube cable together.
• Suitable for direct bury applications.
• Sealed to IP68 using a low temperature heat shrink.
• The joint is protected using a 20mm diameter conduit.
• Standard 5-5mm tube connector is used to join the two cables together.
Technical Data
• Maximum Cable Diameter (mm): 16
• Maximum no of tube connections: 1
• IP Rating: 68
• Required space envelope (mm): (l) 250 x (Ø) 22
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Suitable for 1 to 4 tube Blown Fibre applications.
• Suitable for use in ducted networks or direct-buried applications.
• IP68 rating.
• Compact size.
• The application of these joints provides a block to the longitudinal
passage of water within a cable.
• Once the resin has cured the joint can be re-entered to re-configure
the tube arrangement.
Technical Data
• Number of cable ports: 2 – 3 (depending upon configuration)
• Maximum cable diameter (mm): 25
• Maximum number of ports: 3
• Maximum tube capacity: 4
• Operating temperature: -20oC to + 60oC
• Material:-
• Joint Shells High Density Polythene
• Resin Polyurethane
• Testing:-
• Closure Sealing IP68
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Small compact snap fit single piece closure for connecting ducts / tubes.
• Two 7mm ports for connecting the 7mm duct.
• One 4mm branch port for spurring of fibres through a 4mm duct.
• Can be used to cut an existing 7mm duct and re-connect it mechanically
whilst leaving the fibres passing through in tact. The required fibres can
then be accessed, retracted and spurred off into a 4mm branch duct.
• For mechanical connection only. The unit is not sealed.
Technical Data
• Required space envelope (mm): (w) 66 x (h) 36 x (d) 25 mm
• Material: Polypropylene 10% GF
• Colour: Natural (semi Transparent)
• Duct Pull Out Retention:
> 40N (7mm port)
> 15N (4mm port)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• For all RetractanetXS cables and cable combinations up to 18 mm.
• Watertight IP68.
• Tension relief on RetractanetXS cable and RetractanetXS fibre modules.
• Direct buried application.
• Crush and impact resistant.
Technical Data
• Number of cable ports: Single version: 1 port on each side
Multiple version: combinations of 1, 3 or 6 ports
• Cable retention 18 mm cable: 400 N
15 mm cable: 330 N
6 mm cable: 25 N
• Fibre module retention 1.25 mm fibre module: 25 N
• Crush resistance 1000N/10 cm @ 20°C
• Impact resistance 10 Nm @ 20°C, radius 200 mm
• Water immersion IP68 (no water ingress at 5 meter water pressure for 7 days)
• Application area Group 1 in accordance with EN 124, 25 cm below surface level
• Temperature range Transport & storage: -10°C – +50°C (short term < 14 days)
+10°C - +35°C (long term)
Installation -10°C - +50°C
Processing temperature +10°C - +35°C (2 component resin)
Operation -20°C - +60°C
● Curing time Installation after 5 minutes, completely cured after 30 minutes
● Dimensions Single version: (l) 240 mm x (w) 25 mm x (d) 25 mm
Multiple version: (l) 200 mm x (w) 40 mm x (d) 40 mm
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
up to 24t DB or DI SiroccoXS cable.
pre-configured micro-duct cables up to 40mm.
• Drop Port can accept:
3 x DB1 SiroccoXS cables
1 x DB2 SiroccoXS cable
• Allows Individual Tube Breakout and tube re-routing.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 200 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
pre-configured micro-duct cables up to 40mm.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 100 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
pre-configured micro-duct cables up to 40mm.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 50mm
• Dimensions: (L) 640 x (W) 100 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
up to 24t DB or DI SiroccoXS cable.
pre-configured micro-duct cables up to 40mm.
• Drop Port can accept:
3 x DB1 SiroccoXS cables
1 x DB2 SiroccoXS cable
• Allows Individual Tube Breakout and tube re-routing.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 200 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Easy and quick mounting without loss of parts
• Unbreakable, corrosion resistant and resistant to most chemicals
• Stand up to tough working conditions, duct bending an pulling
• High working pressure class PN 16
• Re-usable
• UV resistant
• Vibration resistant
Technical Data
• Working pressure: All sizes maximum 16 bar
• Temperature range:
Transport & storage: -30°C – +70°C
Installation: -10°C – +50°C
Operation: -20°C – +60°C
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Push-fit operation.
• Re-enterable.
• Re-usable connector (spare covers on request).
• Transparent housing and transparent cover enables visual check on microduct
installation and on cable position.
• The housing provides increased impact resistance for direct buried installation.
• Air tight.
• Waterproof.
• Suitable for both EaseNetXS & JetNetXS systems.
Technical Data
• Straight and end stop connectors:
Microduct OD 14±0.2mm
Microduct ID <12.0mm
Pull-out force 360N
Crush resistance > 1000 N
Impact resistance > 5.0 Nm @ radius 300 mm @ -15°C to +20°C
Working pressure 16 bar @ +20°C
Leakage @16 bar < 1 cc/min
• Transport and storage -10°C to + 50°C
• Installation temperature -10°C to + 50°C
• Operating temperature: -20°C to + 60°C
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
