You are here:
9 sonucun tümü gösteriliyor
Ürünler
Features and Benefits
• Racks are available in 42U or 47U heights.
• They can be supplied configured with either 19” or ETSI mounting
rails.
• Double depth racks (600mm) are available for increased capacity,
allowing modules to be arranged back to back.
• Steel or glass doors can be supplied as requested.
• Brushed exit roofs are supplied for patch cord routing.
• Supplied fitted with a three point lock bar and lever handle.
• Can be supplied pre-fitted with Prysmian Rack Mounted Products.
Technical Data
• Required space envelope (mm): 42U standard: (w) 600 x (d) 300 x (h) 2000
42U double depth: (w) 600 x (d) 600 x (h) 2000
47U standard: (w) 600 x (d) 300 x (h) 2200
47U double depth: (w) 600 x (d) 600 x (h) 2200
• Materials: Mild Steel
• Finish: Painted Light Grey (RAL 7035)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• ETSI standard rack used to accommodate Sliding Sub-Racks.
• Up to 14 Sliding Sub-Racks can be accommodated.
• Sliding Sub-Racks are available for splicing (SSR-S), patching
(SSR-P) and splicing and patching (SSR-SP).
• Sliding Sub-Racks are fitted into the rack using rear mounting
rails.
• The rack can be supplied fully configured as a composed rack
with side channels or the parts can be ordered separately.
• Side channels are designed to hold cable clamps for the routing of
cable fibres, and patch cord Storage Drums for the over-length
management of the pigtails and patch cords.
• Straight or elbowed Patch Cord Storage Drums are available.
• All panels are removable and allow full access to the rack and
accessories during installation or maintenance.
• Can be used in a cascade layout; either side by side or back to
back.
• Locks are available for restricted access to the rack.
• Cables are inserted from the top or the bottom.
Technical Data
• Maximum Capacity: 14 Sliding Sub-Racks
• Required space envelope (mm):-
• Main Frame (h)2200 x (w)600 x (d)300
• Side Channel Option 1 (h)2200 x (w)150 X (d)300
• Side Channel Option 2 (h)2200 x (w)300 x (d)300
• Material:-
• Metalwork: Mild Steel
• Plastic PC ABS
• Finish:-
• Metalwork: Painted light grey (RAL 7035)
• Plastic Grey RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Easy installation and maintenance due to removable panels.
• Allows the termination of up to 5 cables with entry from the top or the
bottom.
• Up to 5 Compact Sub-Racks can be fitted.
• Allows single circuit management.
• Compact Sub-Racks are available with a wide range of connectors such
as SC, FC, ST, LC and E2000.
• Compact Sub-Racks can also be used to store patch cord over-lengths.
• Easy fibre management, pivoting main tray allows all splicing modules
to be accessed easily.
• Tube guides allow access of transport tube with fibres coming from the
main rack or another sub-rack.
• The rack is supplied with a Cable Head Splitting Device which contains
5 tubes at 3 metres long. The device is used to breakout a cable in the
rack and route the fibres to any of the Compact Sub-Racks within the
rack
Technical Data
• Max Fibre capacity: 120 on a single circuit and splice + patch basis
• Required space envelope (mm): (w) 300 x (d) 300 x (h) 2200
• Operating temperature: -20o
C to + 50o
C (5 to 95% RH)
• Materials:-
• Internal Metalwork: Mild Steel
• External Metalwork: Mild Steel
• Plastics: PC ABS (Fire Retardant)
• Finish:-
• Internal Metalwork: Zinc passivate (Clear)
• External Metalwork: Painted Light Grey (RAL 7035)
• Plastic: Light Grey (RAL 7035)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The rack can accommodate the range of SRS3000 shelves
and sub-racks. Please note that other 19” rack mounted
products and equipment can be mounted into the RS3000
rack. Refer to the other products within the OAsys range.
• SRS3000 shelves and sub-racks are available for Splicing
Only, Patching Only, Splicing + Patching and Patchcord
Storage. They can be supplied in 1U, 2U or 3U formats.
• Up to 40 single (1U) SRS3000 shelves can be accommodated
in a 42U rack providing a capacity of 1920 fibres on a splice
and patch basis. Up to 45 single (1U) SRS3000 shelves can
be accommodated in the 47U rack, providing a capacity of
2160 fibres on a splice and patch basis.
• The rack can also be supplied with a 3U routing channel in
the bottom for patchcord routing to adjacent racks. Note that
3U of the above capacity is lost in these cases.
• The rack is supplied fully configured as a composed rack
with side channels, doors, 19” mounting rails, patchcord
storage mandrels and cable anchor brackets.
• Cables are anchored and distributed in the left hand side of
the rack using & BEM cable anchors. See additional items.
• Patchcord storage drums are supplied in the right hand side
of the rack, for patchcord storage and bend management..
• Locks are available for restricted access to the rack. Order
lock separately XKTSC00353.
Technical Data
• Maximum Capacity:
• 42U: 40 SRS 3000 shelves (1U), or 37 if ordering a rack with a routing channel
• 47U: 45 SRS 3000 shelves (1U), or 42 if ordering a rack with a routing channel.
• Maximum Fibre Capacity:
(using SRS3000 products)
• 42U: * 1920 (splice only, patch only and splicing + patching with SC and LC connectors)
• 42U: * 960 (patch only and splicing + patching with FC, ST and E2000 connectors)
• 47U: * 2160 (splice only, patch only and splicing + patching with SC and LC connectors)
• 47U: * 1080 (patch only and splicing + patching with FC, ST and E2000 connectors)
* Note: if ordering a rack with a 3U routing channel in the bottom the above capacities
will be reduced.
• Required space envelope (mm):-
• 42U: (h) 2000 x (w) 900 x (d) 300
• 47U: (h) 2200 x (w) 900 X (d) 300
• Material: Mild Steel
• Finish: Painted light grey (RAL 7035
Features and Benefits
• ETSI standard rack used to accommodate Sliding SubRacks.
• Up to 14 Sliding Sub-Racks can be accommodated.
• Sliding Sub-Racks are available for splicing (SSR-S),
patching (SSR-P) and splicing and patching (SSR-SP).
• Sliding Sub-Racks are fitted into the rack using rear
mounting rails.
• Side channels are designed to hold cable clamps for the
routing of cable fibres, and patch cord Storage Drums for the
over-length management of the pigtails and patch cords.
• Straight or elbowed Patch Cord Storage Drums are
available.
• All panels are removable and allow full access to the rack
and accessories during installation or maintenance.
• Can be used in a cascade layout; either side by side or back
to back.
• Locks are available for restricted access to the rack.
• Cables are inserted from the top or the bottom.
Technical Data
• Maximum Capacity: 14 Sliding Sub-Racks
• Required space envelope (mm):-
• Main Frame (h)2200 x (w)900 x (d)300
• Material:-
• Metalwork: Mild Steel
• Plastic PC ABS
• Finish:-
• Metalwork: Painted light grey (RAL 7035)
• Plastic Grey RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Eliminates the need for single fibre jumper cables, removing the issues of
over-length storage and congestion.
• Supplied in ‘flat pack’ format to minimise transport costs and ease handling.
• The OCR accommodates up to 8 OCR sub-racks (see next page).
• Each OCR sub-rack has a capacity of 144 fibres, managed on a single circuit
basis, providing a total capacity within the rack of 1152 fibres.
• The rack is pre-tubed from the cable breakout organiser to the sub-rack
positions. A sub-rack is simply located in place, connected to the tube
connection panel and fibres can be routed directly to the sub-rack.
• Cable entry to the rack is from overhead. All cables can be installed on day
one without the need for any sub-racks installed, as cable fibres are broken
out and stored in the Cable Breakout Organiser for later use.
• Pre-connectorised cables exit the rack from the top right hand side. The
cables are routed and stored in segregated Cable Guides.
• Reels are used to store spare fibres of pre-connectorised cables for later use.
• Rack can be secured to the floor through four fixing holes (four levelling bolts
are also provided). Two M12 fixing points are provided in the top face for
securing to suitable suite ironwork.
• Supplied with an integral high level storage shelf.
Technical Data
• Spliced fibre capacity: 576 fibres on a single fibre basis
1152 fibres on a single circuit basis
• Cable capacity: 36
• Required space envelope (mm): (w) 900 x (d) 300 x (h) 2200
• Operating temperature: -20o
C to + 50o
C (5 to 95% RH)
• Materials:-
• Internal Metalwork: Mild Steel
• External Metalwork: Mild Steel
• Plastics: High Impact Polystyrene (Fire Retardant)
• Finish:-
• Internal Metalwork: Zinc passivate (Clear)
• External Metalwork: Painted Light Grey (RAL 7035)
• Plastic: Light Grey (RAL 7035)
• Testing:-
• Optical: Tested at 1310nm, 1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 68-2-3
• Change of temperature IEC 68-2-14
• Vibration: IEC 68-2-6
• Shock: IEC 68-2-27
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• IP55 rated with foamed in seals in panels and doors.
• 800 x 800mm footprint.
• 42U in height (2000mm).
• Manufactured from sheet steel.
• Panels are dipcoat powder painted to RAL 7035.
• A plinth is available to mount the rack (additional 200mm height).
• 19” mounting rails are supplied in the front and rear.
• Rack is supplied with front and rear doors.
• Supplied with steel doors or one steel door and one glass door.
• Supplied fitted with a four point latching locking bar and lever handle.
• The racks are bayable on all sides.
• Can be supplied pre-fitted with Prysmian Rack Mounted Products.
Technical Data
• Required space envelope (mm): 820 (w) x 875 (d) x 2010 (h) (maximum dimensions including handles)
• Material: Sheet Steel
• Thickness:
• Frame 1.5mm
• Rear Panel 1.5mm
• Roof 1.5mm
• Door 2.0mm
• Gland Plate 3.0mm
• Mounting Plate 3.0mm
• Finish:
• Frame: Dipcoat primed
• Door, Roof and Panels: Dipcoat primed – powder coated and textured RAL 7035
• Mounting Plate and Gland plate: Zinc Plated
• Sealing: IP55 Panels and doors have foamed in seals
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The rack can accommodate the range of SRS3000 shelves
and sub-racks. Please note that other 19” rack mounted
products and equipment can be mounted into the RS3000
rack. Refer to the other products within the OAsys range.
• SRS3000 shelves and sub-racks are available in 1U, 2U or
3U formats.
• Up to 45 single (1U) SRS3000 shelves can be accommodated
in the 47U rack, providing a capacity of 2160 fibres on a
patch only basis.
• The rack is supplied fully configured as a composed rack
with side channels, doors, 19” mounting rails and patchcord
storage mandrels.
• Patchcord storage drums are supplied in the left hand and
right hand side of the rack, for patchcord storage and bend
management..
• The rack is suitable for patch only shelves only as no cable
management brackets can be fitted.
• Locks are available for restricted access to the rack. Order
lock separately XKTSC00353.
Technical Data
• Maximum Capacity:
• 47U: 45 SRS 3000 shelves (1U)
• Maximum Fibre Capacity:
(using SRS3000 products)
• 47U: * 2160 (patch only with SC and LC connectors)
• 47U: * 1080 (patch only with FC, ST and E2000 connectors)
• Required space envelope (mm):-
• 47U: (h) 2200 x (w) 900 X (d) 300
• Material: Mild Steel
• Finish: Painted light grey (RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• A modular rack system for use in the exchange or communications
room.
• The rack is made up of vertical pillars which can be assembled
together to achieve the required capacity.
• Each vertical pillar can accommodate up to 6 sub-racks.
• Two types of sub-rack are available – splice and patch (Network)
and patch only (Equipment).
• Network sub-racks are supplied with SC/APC pigtails and adapters.
Equipment sub-racks are supplied with SC/APC adapters.
• Each sub-rack contains six module trays. Each module tray houses
two 12 fibre splice trays. Each module tray can accommodate up to
24 fibres and 24 pigtails and adapters.
• The total capacity of each sub-rack is 144 fibres providing a total
capacity per rack pillar of 864 fibres.
• Network cables are terminated using cable breakout units (BEMS)
which are anchored to cable anchor plates located on the network
rack pillars.
• Equipment patch cords or pre-terminated cables are anchored to
cable anchor plates located on the equipment rack pillars.
• The racks have multiple built in raceways for patch cord routing
and bend management.
• The rack is constructed of steel powder coat painted black.
Technical Data
• Sub-Rack Fibre Capacity: 144
• Sub-Rack Connector Capacity: 144 x SC Type
• Pillar Sub-Rack Capacity: 6
• Pillar Fibre Capacity: 864
• Pillar Connector Capacity: 864 x SC Type
• Pillar Dimensions: (h) 2240 x (w) 540 x (d) 500
• Four Pillar Rack Dimensions: (h) 2240 x (w) 1700 x (d) 784
(as per photo on page 1)
• Material:
• Pillar: Mild Steel
• Sub Rack Mild Steel
• Splice Trays: FR ABS
• Perimeter Kit: Mild Steel
• Finish:
• Pillar: Painted Black
• Sub-Rack Painted Grey RAL 7035
• Splice Trays: Grey RAL 7035
• Perimeter Kit: Zinc Plated
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
