Prysmian
7
You are here:
141 sonuçtan 65-80 arası gösteriliyor
Ürünler
Features and Benefits
• ETSI standard rack used to accommodate Sliding SubRacks.
• Up to 14 Sliding Sub-Racks can be accommodated.
• Sliding Sub-Racks are available for splicing (SSR-S),
patching (SSR-P) and splicing and patching (SSR-SP).
• Sliding Sub-Racks are fitted into the rack using rear
mounting rails.
• Side channels are designed to hold cable clamps for the
routing of cable fibres, and patch cord Storage Drums for the
over-length management of the pigtails and patch cords.
• Straight or elbowed Patch Cord Storage Drums are
available.
• All panels are removable and allow full access to the rack
and accessories during installation or maintenance.
• Can be used in a cascade layout; either side by side or back
to back.
• Locks are available for restricted access to the rack.
• Cables are inserted from the top or the bottom.
Technical Data
• Maximum Capacity: 14 Sliding Sub-Racks
• Required space envelope (mm):-
• Main Frame (h)2200 x (w)900 x (d)300
• Material:-
• Metalwork: Mild Steel
• Plastic PC ABS
• Finish:-
• Metalwork: Painted light grey (RAL 7035)
• Plastic Grey RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Eliminates the need for single fibre jumper cables, removing the issues of
over-length storage and congestion.
• Supplied in ‘flat pack’ format to minimise transport costs and ease handling.
• The OCR accommodates up to 8 OCR sub-racks (see next page).
• Each OCR sub-rack has a capacity of 144 fibres, managed on a single circuit
basis, providing a total capacity within the rack of 1152 fibres.
• The rack is pre-tubed from the cable breakout organiser to the sub-rack
positions. A sub-rack is simply located in place, connected to the tube
connection panel and fibres can be routed directly to the sub-rack.
• Cable entry to the rack is from overhead. All cables can be installed on day
one without the need for any sub-racks installed, as cable fibres are broken
out and stored in the Cable Breakout Organiser for later use.
• Pre-connectorised cables exit the rack from the top right hand side. The
cables are routed and stored in segregated Cable Guides.
• Reels are used to store spare fibres of pre-connectorised cables for later use.
• Rack can be secured to the floor through four fixing holes (four levelling bolts
are also provided). Two M12 fixing points are provided in the top face for
securing to suitable suite ironwork.
• Supplied with an integral high level storage shelf.
Technical Data
• Spliced fibre capacity: 576 fibres on a single fibre basis
1152 fibres on a single circuit basis
• Cable capacity: 36
• Required space envelope (mm): (w) 900 x (d) 300 x (h) 2200
• Operating temperature: -20o
C to + 50o
C (5 to 95% RH)
• Materials:-
• Internal Metalwork: Mild Steel
• External Metalwork: Mild Steel
• Plastics: High Impact Polystyrene (Fire Retardant)
• Finish:-
• Internal Metalwork: Zinc passivate (Clear)
• External Metalwork: Painted Light Grey (RAL 7035)
• Plastic: Light Grey (RAL 7035)
• Testing:-
• Optical: Tested at 1310nm, 1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 68-2-3
• Change of temperature IEC 68-2-14
• Vibration: IEC 68-2-6
• Shock: IEC 68-2-27
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• IP55 rated with foamed in seals in panels and doors.
• 800 x 800mm footprint.
• 42U in height (2000mm).
• Manufactured from sheet steel.
• Panels are dipcoat powder painted to RAL 7035.
• A plinth is available to mount the rack (additional 200mm height).
• 19” mounting rails are supplied in the front and rear.
• Rack is supplied with front and rear doors.
• Supplied with steel doors or one steel door and one glass door.
• Supplied fitted with a four point latching locking bar and lever handle.
• The racks are bayable on all sides.
• Can be supplied pre-fitted with Prysmian Rack Mounted Products.
Technical Data
• Required space envelope (mm): 820 (w) x 875 (d) x 2010 (h) (maximum dimensions including handles)
• Material: Sheet Steel
• Thickness:
• Frame 1.5mm
• Rear Panel 1.5mm
• Roof 1.5mm
• Door 2.0mm
• Gland Plate 3.0mm
• Mounting Plate 3.0mm
• Finish:
• Frame: Dipcoat primed
• Door, Roof and Panels: Dipcoat primed – powder coated and textured RAL 7035
• Mounting Plate and Gland plate: Zinc Plated
• Sealing: IP55 Panels and doors have foamed in seals
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The rack can accommodate the range of SRS3000 shelves
and sub-racks. Please note that other 19” rack mounted
products and equipment can be mounted into the RS3000
rack. Refer to the other products within the OAsys range.
• SRS3000 shelves and sub-racks are available in 1U, 2U or
3U formats.
• Up to 45 single (1U) SRS3000 shelves can be accommodated
in the 47U rack, providing a capacity of 2160 fibres on a
patch only basis.
• The rack is supplied fully configured as a composed rack
with side channels, doors, 19” mounting rails and patchcord
storage mandrels.
• Patchcord storage drums are supplied in the left hand and
right hand side of the rack, for patchcord storage and bend
management..
• The rack is suitable for patch only shelves only as no cable
management brackets can be fitted.
• Locks are available for restricted access to the rack. Order
lock separately XKTSC00353.
Technical Data
• Maximum Capacity:
• 47U: 45 SRS 3000 shelves (1U)
• Maximum Fibre Capacity:
(using SRS3000 products)
• 47U: * 2160 (patch only with SC and LC connectors)
• 47U: * 1080 (patch only with FC, ST and E2000 connectors)
• Required space envelope (mm):-
• 47U: (h) 2200 x (w) 900 X (d) 300
• Material: Mild Steel
• Finish: Painted light grey (RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• A modular rack system for use in the exchange or communications
room.
• The rack is made up of vertical pillars which can be assembled
together to achieve the required capacity.
• Each vertical pillar can accommodate up to 6 sub-racks.
• Two types of sub-rack are available – splice and patch (Network)
and patch only (Equipment).
• Network sub-racks are supplied with SC/APC pigtails and adapters.
Equipment sub-racks are supplied with SC/APC adapters.
• Each sub-rack contains six module trays. Each module tray houses
two 12 fibre splice trays. Each module tray can accommodate up to
24 fibres and 24 pigtails and adapters.
• The total capacity of each sub-rack is 144 fibres providing a total
capacity per rack pillar of 864 fibres.
• Network cables are terminated using cable breakout units (BEMS)
which are anchored to cable anchor plates located on the network
rack pillars.
• Equipment patch cords or pre-terminated cables are anchored to
cable anchor plates located on the equipment rack pillars.
• The racks have multiple built in raceways for patch cord routing
and bend management.
• The rack is constructed of steel powder coat painted black.
Technical Data
• Sub-Rack Fibre Capacity: 144
• Sub-Rack Connector Capacity: 144 x SC Type
• Pillar Sub-Rack Capacity: 6
• Pillar Fibre Capacity: 864
• Pillar Connector Capacity: 864 x SC Type
• Pillar Dimensions: (h) 2240 x (w) 540 x (d) 500
• Four Pillar Rack Dimensions: (h) 2240 x (w) 1700 x (d) 784
(as per photo on page 1)
• Material:
• Pillar: Mild Steel
• Sub Rack Mild Steel
• Splice Trays: FR ABS
• Perimeter Kit: Mild Steel
• Finish:
• Pillar: Painted Black
• Sub-Rack Painted Grey RAL 7035
• Splice Trays: Grey RAL 7035
• Perimeter Kit: Zinc Plated
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• For use in both 19” and ETSI standard racks.
• Suitable for Single Circuit management (up to 4 fibres per
tray) or Single Element management (up to 12 fibres per
tray).
• Can accommodate up to 96 splices in a 19” rack, and up to
120 splices in an ETSI rack for cable to pigtail splicing.
• Can accommodate up to 144 splices in a 19” rack or ETSI
rack for cable to cable splicing.
• Modular upgradeable solution.
• Shelf pulls outwards to enable easy access to the splice
trays.
• Splice tray holders are available for crimp, heatshrink or
fiberlock (only with half of the capacity) splices.
• Compatible with the OAsys Modular Main Rack.
• Fully bend managed to 30mm minimum bend radius.
Technical Data
SSR-S-59CC (cable to cable)
• Max Number of splice trays: 19”: 40 (SC), 16 (SE)
ETSI: 40 (SC), 16 (SE)
• Max number of splices: 19”: 144, ETSI: 144
• Max number of transport tubes: 12 in Ø 3.5/5 mm
12 out Ø 3.5/5 mm
• Required space envelope (mm): 19”: (w) 440 x (d) 280 x (h) 133
ETSI: (w) 490 x (d) 280 x (h) 133
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material:-
• Metalwork: Mild Steel (painted grey RAL 7035)
• Plastics: PC ABS (grey RAL 7035)
• Packing Dimensions (mm): (w) 570 x (d) 350 x (h) 200
• Packed Weight (kg): 8.3 (ETSI) 6.9 (19”)
• Net weight (kg): 7.5 (ETSI) 6.1 (19”)
SSR-S-59 (cable to pigtails)
• Max Number of splice trays: 19”: 48 (SC), 20 (SE)
ETSI: 60 (SC), 24 (SE)
• Max number of pigtails: 19”: 96, ETSI: 120
• Max number of transport tubes: 12 in Ø 3.5/5 mm
12 out Ø 3.5/5 mm
• Required space envelope (mm): 19”: (w) 440 x (d) 280 x (h) 133
ETSI: (w) 490 x (d) 280 x (h) 133
• Operating temperature: -20oC to + 60oC (5 to 95% RH)
• Material:-
• Metalwork: Mild Steel (painted grey RAL 7035)
• Plastics: PC ABS (grey RAL 7035)
• Testing:-
• Optical: tested at 1310 nm and 1550 nm
• Dry heat: IEC 60068-2-2 test B
• Damp heat: IEC 60068-2-3
• Change of temperature: IEC 60068-2-14
• Vibration: IEC 60068-2-6
• Shock: IEC 60068-2-27
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• For use in both 19” and ETSI standard racks.
• Provides management of fibres through patching.
• Shelf pulls outwards to enable easy access to the patching
modules.
• Modules hinge upwards to provide access to the module
below.
• The shelf can accommodate a variety of different connector
types.
• Supplied with 72 adapters pre-installed to save installation
time.
• Compatible with the OAsys Modular Main Rack.
• Fully bend managed to 30mm minimum bend radius.
Technical Data
• Max Number of Adapters: 72
• Required space envelope (mm): 19” – (w) 415 x (d) 280 x (h) 133.5
ETSI – (w) 495 x (d) 280 x (h) 133.5
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: FR Polymer
• Finish:-
• Metalwork: Painted light grey (RAL 7035)
• Plastics: Grey
• Testing:-
• Optical: Tested at 1310nm and 1550nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Provides management of fibres through Splicing and
Patching.
• Splicing and bare fibre excess storage is performed inside a
splice tray protected by a cover.
• Compatible with 19” and ETSI racks.
• Supplied with 72 Adapters and pigtails pre-installed onto
the splice trays ready for connection to cable fibres.
• The shelf can accommodate a variety of different connector
types.
• Shelf pulls outwards to enable easy access to the splice
trays.
• Modules hinge upwards to provide access to the module
below.
• compatible with the OAsys Modular Main Rack.
• Fully bend managed to 30mm minimum bend radius.
Technical Data
• Max number of Adapters: 72
• Max number of Splices: 72
• Required space envelope (mm): 19” – (w) 415 x (d) 280 x (h) 133.5
ETSI – (w) 495 x (d) 280 x (h) 133.5
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: FR Polymer
• Finish:-
• Metalwork: Painted light grey (RAL 7035)
• Plastics: Grey
• Testing:-
• Optical: Tested at 1310nm and 1550nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• High density low cost compact design for up to 48 fibres.
• Compatible with SC, FC, E2000, LC, ST connecter types.
• Cables anchor on the rear of the unit using a cable anchor plate supplied.
• Unit manufactured from high strength fire retardant plastic to give a light
weight solution.
• Supplied either as an empty unit, in kit format (with pigtails and adapters
in a bag) for installer loading, or with the pigtails and adapters pre-installed
by Prysmian.
• All fibres are positively managed to a 30mm minimum bend radius.
• Shelf pivots out to for access to the splice tray and pigtail area.
• Shelf can be used as a patch only solution and allows excess cable lengths
to be stored.
• Stackable splice bay allows for easy upgrade of splicing capacity.
• The shelf offers the ability to terminate up to 2 cables and allows through
splicing of fibres.
• Compatible with Sirocco blown fibre cables using a Blown Fibre Manifold.
The manifold enables up to 6 blown fibre tubes to be routed to a single
shelf.
• Available in 2 colours – grey RAL 7035 and black.
Technical Data
• No of splice trays: 1
• Maximum fibre capacity 24 (ST, FC, E2000)
48 (SC, LC)
• Max. Cable Diameter (mm): 18
• Cable capacity: 2
• Required space envelope (mm): (w) 481 x (d) 230 x (h) 44
• Operating temperature: -20o
C to + 50o
C (5 to 95% RH)
• Material: High Impact Polystyrene (Fire Retardant)
• Colour: Light Grey RAL 7035 or Black
• Testing:
• Optical: Tested at 1310nm and 1550nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 68-2-3
• Change of temperature IEC 68-2-14
• Vibration: IEC 68-2-6
• Shock: IEC 68-2-27
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• High density cost effective compact design for housing
connectorised splitters in racks or cabinets.
• Compatible with SC and LC connecter types.
• Dedicated input and output positions for the splitter legs.
• Unit manufactured from high strength fire retardant plastic to give
a light weight solution.
• Supplied with connectorised splitters pre-installed by Prysmian.
• All fibres are positively managed to a 30mm minimum bend radius.
• Shelf pivots out to enable access to the splitter storage area for
maintenance.
• Ideal for high density FTTH applications with Passive Optical
Networks (PON)
• Can be mounted in racks, wall cabinets and street-side cabinets
Technical Data
• Required space envelope (mm): (w) 481 x (d) 230 x (h) 44
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material: High Impact Polystyrene
• Colour Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
•Modular panel design enables easy capacity upgrades from 12 to 48
fibres.
• Very high splice and patch density of 48 fibres for SC and LC connector
types in 1U.
• High splice and patch density of 24 fibres for ST, FC and E2000
connector types in 1U.
• Suitable for installation into 19”/ ETSI / ANSI racks, wall mounted
cabinets and street-side cabinets.
• Splice and patch module pivots outwards for easy fibre access and
maintenance.
•The drop down front panel prevents accidental disconnection of patchcords and provides additional space for patchcord routing during
installations.
• All fibres are positively bend managed to a 30mm radius
• Supplied with a large cover label and front panel labels for easy
identification and data recording.
• Splice and patch bay is covered with a detachable lid (secured with two
screws) to protect the splices and pigtails once installed.
•The panel can be used for optical splitters and other passive devices in
alternative configurations. Please contact Prysmian for further
information.
• Can accommodate most cable types including blown fibre tube cables.
Note: for 48f 1U shelves a 2mm Patch-cord size should be used.
Technical Data
• Max number of terminations 48 for SC or LC connectors
24 for FC, ST and E2000 connectors
• Max number of patchcords out: 48 with 2mm diameter patch cords
• Max Cable Diameter: 14mm
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
Modular system for installation into 19” / ETSI / ANSI racks, street-side
cabinets and wall mounted cabinets.
The sub-rack can be supplied fully configured or modules can be supplied
empty for upgrading at a later date.
Chassis are available in 1U, 2U and 3U options are supplied front
mounted as standard. Rear mounting brackets are available as an option.
Fibres are actively managed to minimum bend diameters throughout the
Splicing and Patching, Patching only, Splicing only, Patchcord Storage and
Splitter Modules.
Splicing and bare fibre excess storage is performed inside a tray
protected by a cover to prevent any accidental damage when open &
closing the shelves.
Modules pivot outwards for easy access.
Cables are completely protected from entry to exit of the panel.
Optical devices (i.e. Splitters & WDM’s) can be mounted within the
modules. Please contact Prysmian to discuss your requirements)
Wall mount 19” and ETSI cabinets are also available. Please contact
Prysmian for further details.
Modules have drop down fronts for easier patchcord routing, enclosing
patch-cords, and protecting adapters.
2 large labelling areas provided for identification recording per module.
Technical Data
• Max number of splices
• 1U 48 ( SC & LC), 24 ( FC, ST & E2000)
• 2U 96 (SC & LC), 48 (FC, ST & E2000)
• 3U 144 (SC & LC), 72 (FC, ST & E2000)
• Max number of output patchcords:
• 1U 48 with 2mm diameter patch cords
• 2U 96 with 2mm diameter patch cords
• 3U 144 with 2mm diameter patch cords
• Max Cable Diameter (mm): 14
• Required space envelope (mm):
• 1U: (w) 480 x (d) 245 x (h) 44.5
• 2U (w) 480 x (d) 245 x (h) 89.0
• 3U (w) 480 x (d) 245 x (h) 133.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Suitable for installation into 19”/ ETSI / ANSI racks, wall mounted
cabinets and street-side cabinets.
• The shelf has a capacity of up to 48 fibre splices.
• The shelf is supplied with splice protector holders for 2.2mm heat
shrink splice protectors. Crimp splice protectors can also be
accommodated by using crimp splice protector holders. Refer to
additional items.
• Can accommodate most cable types including blown fibre tube cables.
• Splice module pivots outwards for easy fibre access and maintenance.
• The shelf can be used for optical splitters and other passive devices in
alternative configurations. Please contact Prysmian for further
information.
• The drop down front panel prevents accidental disconnection of fibre
routing tubes during installations.
• All fibres are positively bend managed to a 30mm radius
• Supplied with a large cover label and front panel labels for easy
identification and data recording.
• Splice bay is covered with a detachable lid (secured with two screws)
to protect the fibres once installed.
Technical Data
• Max number of splices 48
• Splice protectors accommodated: 2.2mm heat shrink or crimp
• Max number of output patchcords: 48 with 2mm diameter patch cords
• Max Cable Diameter: 14mm
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
•Modular panel design enables easy capacity upgrades from 12 to 48
adapters.
• Very high patch density of 48 adapters for SC and LC connector types in
1U and High patch density of 24 adapters for ST, FC and E2000
connector types in 1U.
• Suitable for installation into 19”/ ETSI / ANSI racks, wall mounted
cabinets and streetside cabinets.
• Patch module pivots outwards for easy fibre access and maintenance.
• The panel can be used for optical splitters and other passive devices in
alternative configurations. Please contact Prysmian for further
information.
• The drop down front panel prevents accidental disconnection of patchcords and provides additional space for patchcord routing during
installations.
• All fibres are positively bend managed to a 30mm radius
• Supplied with a large cover label and front panel labels for easy
identification and data recording.
• Patch bay is covered with a detachable lid (secured with two screws) to
protect the fibres once installed.
• Can accommodate most cable types including blown fibre tube cables.
Note: for 48f 1U shelves a 2mm Patch-cord size should be used.
Technical Data
• Max number of terminations 48 for SC or LC connectors
24 for FC, ST and E2000 connectors
• Max number of output patchcords: 48 with 2mm diameter patch cords
• Max Cable Diameter: 14mm
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Suitable for installation into 19”, ETSI and ANSI racks.
• Can be used to store patchcords prior to installation or to
store patchcord overlength.
• Storage capacity of up to 2 metres of 24 patchcords 2.8mm in
diameter or 48 patchcords of 2.0mm in diameter.
• Overlength capacity of up to 2.5 metres of 24 patchcords
2.8mm in diameter or 48 patchcords of 2.0mm in diameter.
• Can be upgraded to an SRS3000 Patch Only Shelf. Refer to
the Upgrade Kits in the additional items section of Prysmian
data sheet RM019 – SRS3000 Patch Only Shelf.
• Storage module pivots outwards for easy patchcord access.
• All fibres are positively bend managed to a 30mm radius
• Supplied with a large cover label and front panel labels for
easy identification and data recording.
• Patchcords are available for supply from Prysmian. Refer to
Prysmian data sheet AC004.
Technical Data
• Max Storage Capacity:
• 2.0mm Patchcords: 48 x 2.0 metres
• 2.8mm Patchcords: 24 x 2.0 metres
• Max Overlength Capacity:
• 2.0mm Patchcords: 48 x 2.5 metres
• 2.8mm Patchcords: 24 x 2.5 metres
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel painted light grey RAL 7035
• Plastics: High Impact Polystyrene grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• High density cost effective design for housing connectorised splitters in racks
or cabinets.
• Compatible with all connecter types.
• Dedicated input and output positions for the splitter legs.
• Unit manufactured from high strength fire retardant plastic to give a light
weight solution.
• Supplied with connectorised splitters pre-installed by Prysmian. The number
of splitters per shelf depends on the configuration and connector type. The
part number tables on pages 2 to 4 show all of the configurations possible.
• All fibres are positively managed to a 30mm minimum bend radius.
• Shelf pivots out to enable access to the splitter storage area for maintenance.
• Ideal for high density FTTH applications with Passive Optical Networks (PON).
• Can be mounted in racks, wall cabinets and street-side cabinets.
• Compatible with the SRS3000 product range.
• Patch cord are bend managed for extra protection.
• Note: for shelves totalling more than 24 patch cords (input + output) 2mm patch cords
must be used
Technical Data
• Max number of outputs: 32
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted Light Grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.