Prysmian
7
You are here:
351 sonuçtan 145-160 arası gösteriliyor
Ürünler
Features and Benefits
• ETSI standard rack used to accommodate Sliding SubRacks.
• Up to 14 Sliding Sub-Racks can be accommodated.
• Sliding Sub-Racks are available for splicing (SSR-S),
patching (SSR-P) and splicing and patching (SSR-SP).
• Sliding Sub-Racks are fitted into the rack using rear
mounting rails.
• Side channels are designed to hold cable clamps for the
routing of cable fibres, and patch cord Storage Drums for the
over-length management of the pigtails and patch cords.
• Straight or elbowed Patch Cord Storage Drums are
available.
• All panels are removable and allow full access to the rack
and accessories during installation or maintenance.
• Can be used in a cascade layout; either side by side or back
to back.
• Locks are available for restricted access to the rack.
• Cables are inserted from the top or the bottom.
Technical Data
• Maximum Capacity: 14 Sliding Sub-Racks
• Required space envelope (mm):-
• Main Frame (h)2200 x (w)900 x (d)300
• Material:-
• Metalwork: Mild Steel
• Plastic PC ABS
• Finish:-
• Metalwork: Painted light grey (RAL 7035)
• Plastic Grey RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Eliminates the need for single fibre jumper cables, removing the issues of
over-length storage and congestion.
• Supplied in ‘flat pack’ format to minimise transport costs and ease handling.
• The OCR accommodates up to 8 OCR sub-racks (see next page).
• Each OCR sub-rack has a capacity of 144 fibres, managed on a single circuit
basis, providing a total capacity within the rack of 1152 fibres.
• The rack is pre-tubed from the cable breakout organiser to the sub-rack
positions. A sub-rack is simply located in place, connected to the tube
connection panel and fibres can be routed directly to the sub-rack.
• Cable entry to the rack is from overhead. All cables can be installed on day
one without the need for any sub-racks installed, as cable fibres are broken
out and stored in the Cable Breakout Organiser for later use.
• Pre-connectorised cables exit the rack from the top right hand side. The
cables are routed and stored in segregated Cable Guides.
• Reels are used to store spare fibres of pre-connectorised cables for later use.
• Rack can be secured to the floor through four fixing holes (four levelling bolts
are also provided). Two M12 fixing points are provided in the top face for
securing to suitable suite ironwork.
• Supplied with an integral high level storage shelf.
Technical Data
• Spliced fibre capacity: 576 fibres on a single fibre basis
1152 fibres on a single circuit basis
• Cable capacity: 36
• Required space envelope (mm): (w) 900 x (d) 300 x (h) 2200
• Operating temperature: -20o
C to + 50o
C (5 to 95% RH)
• Materials:-
• Internal Metalwork: Mild Steel
• External Metalwork: Mild Steel
• Plastics: High Impact Polystyrene (Fire Retardant)
• Finish:-
• Internal Metalwork: Zinc passivate (Clear)
• External Metalwork: Painted Light Grey (RAL 7035)
• Plastic: Light Grey (RAL 7035)
• Testing:-
• Optical: Tested at 1310nm, 1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 68-2-3
• Change of temperature IEC 68-2-14
• Vibration: IEC 68-2-6
• Shock: IEC 68-2-27
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• IP55 rated with foamed in seals in panels and doors.
• 800 x 800mm footprint.
• 42U in height (2000mm).
• Manufactured from sheet steel.
• Panels are dipcoat powder painted to RAL 7035.
• A plinth is available to mount the rack (additional 200mm height).
• 19” mounting rails are supplied in the front and rear.
• Rack is supplied with front and rear doors.
• Supplied with steel doors or one steel door and one glass door.
• Supplied fitted with a four point latching locking bar and lever handle.
• The racks are bayable on all sides.
• Can be supplied pre-fitted with Prysmian Rack Mounted Products.
Technical Data
• Required space envelope (mm): 820 (w) x 875 (d) x 2010 (h) (maximum dimensions including handles)
• Material: Sheet Steel
• Thickness:
• Frame 1.5mm
• Rear Panel 1.5mm
• Roof 1.5mm
• Door 2.0mm
• Gland Plate 3.0mm
• Mounting Plate 3.0mm
• Finish:
• Frame: Dipcoat primed
• Door, Roof and Panels: Dipcoat primed – powder coated and textured RAL 7035
• Mounting Plate and Gland plate: Zinc Plated
• Sealing: IP55 Panels and doors have foamed in seals
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The rack can accommodate the range of SRS3000 shelves
and sub-racks. Please note that other 19” rack mounted
products and equipment can be mounted into the RS3000
rack. Refer to the other products within the OAsys range.
• SRS3000 shelves and sub-racks are available in 1U, 2U or
3U formats.
• Up to 45 single (1U) SRS3000 shelves can be accommodated
in the 47U rack, providing a capacity of 2160 fibres on a
patch only basis.
• The rack is supplied fully configured as a composed rack
with side channels, doors, 19” mounting rails and patchcord
storage mandrels.
• Patchcord storage drums are supplied in the left hand and
right hand side of the rack, for patchcord storage and bend
management..
• The rack is suitable for patch only shelves only as no cable
management brackets can be fitted.
• Locks are available for restricted access to the rack. Order
lock separately XKTSC00353.
Technical Data
• Maximum Capacity:
• 47U: 45 SRS 3000 shelves (1U)
• Maximum Fibre Capacity:
(using SRS3000 products)
• 47U: * 2160 (patch only with SC and LC connectors)
• 47U: * 1080 (patch only with FC, ST and E2000 connectors)
• Required space envelope (mm):-
• 47U: (h) 2200 x (w) 900 X (d) 300
• Material: Mild Steel
• Finish: Painted light grey (RAL 7035
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• A modular rack system for use in the exchange or communications
room.
• The rack is made up of vertical pillars which can be assembled
together to achieve the required capacity.
• Each vertical pillar can accommodate up to 6 sub-racks.
• Two types of sub-rack are available – splice and patch (Network)
and patch only (Equipment).
• Network sub-racks are supplied with SC/APC pigtails and adapters.
Equipment sub-racks are supplied with SC/APC adapters.
• Each sub-rack contains six module trays. Each module tray houses
two 12 fibre splice trays. Each module tray can accommodate up to
24 fibres and 24 pigtails and adapters.
• The total capacity of each sub-rack is 144 fibres providing a total
capacity per rack pillar of 864 fibres.
• Network cables are terminated using cable breakout units (BEMS)
which are anchored to cable anchor plates located on the network
rack pillars.
• Equipment patch cords or pre-terminated cables are anchored to
cable anchor plates located on the equipment rack pillars.
• The racks have multiple built in raceways for patch cord routing
and bend management.
• The rack is constructed of steel powder coat painted black.
Technical Data
• Sub-Rack Fibre Capacity: 144
• Sub-Rack Connector Capacity: 144 x SC Type
• Pillar Sub-Rack Capacity: 6
• Pillar Fibre Capacity: 864
• Pillar Connector Capacity: 864 x SC Type
• Pillar Dimensions: (h) 2240 x (w) 540 x (d) 500
• Four Pillar Rack Dimensions: (h) 2240 x (w) 1700 x (d) 784
(as per photo on page 1)
• Material:
• Pillar: Mild Steel
• Sub Rack Mild Steel
• Splice Trays: FR ABS
• Perimeter Kit: Mild Steel
• Finish:
• Pillar: Painted Black
• Sub-Rack Painted Grey RAL 7035
• Splice Trays: Grey RAL 7035
• Perimeter Kit: Zinc Plated
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper tube Ø 13.0 mm (0.51 in)
Dielectric: Cellular polyethylene Ø 32.2 mm (1.27 in)
Outer conductor: Corrugated double side slotted copper tube Ø 35.8 mm (1.41 in)
Jacket: See Jacketing Options table below Ø 39.0 mm (1.54 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Corrugated copper tube Ø 17.6 mm (0.69 in)
Dielectric: Cellular polyethylene Ø 42.0 mm (1.65 in)
Outer conductor: Corrugated double side slotted copper tube Ø 46.3 mm (1.82 in)
Jacket: See Jacketing Options table below Ø 50.0 mm (1.97 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper tube Ø 9.3 mm (0.37 in)
Dielectric: Cellular polyethylene Ø 22.0 mm (0.86 in)
Outer conductor: Corrugated double side slotted copper tube Ø 25.2 mm (0.99 in)
Jacket: See Jacketing Options table below Ø 27.8 mm (1.09 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper tube Ø 13.0 mm (0.51 in)
Dielectric: Cellular polyethylene Ø 32.2 mm (1.27 in)
Outer conductor: Corrugated single side slotted copper tube Ø 35.8 mm (1.41 in)
Jacket: See Jacketing Options table below Ø 39.0 mm (1.54 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Corrugated copper tube Ø 17.6 mm (0.69 in)
Dielectric: Cellular polyethylene Ø 42.0 mm (1.65 in)
Outer conductor: Corrugated single side slotted copper tube Ø 46.3 mm (1.82 in)
Jacket: See Jacketing Options table below Ø 50.0 mm (1.97 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper-clad aluminium wire Ø 4.8 mm (0.19 in)
Dielectric: Cellular polyethylene Ø 12.1 mm (0.48 in)
Outer conductor: Corrugated single side slotted copper tube Ø 13.9 mm (0.55 in)
Jacket: See Jacketing Options table below Ø 16.0 mm (0.63 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper tube Ø 9.3 mm (0.37 in)
Dielectric: Cellular polyethylene Ø 22.0 mm (0.86 in)
Outer conductor: Corrugated single side slotted copper tube Ø 25.2 mm (0.99 in)
Jacket: See Jacketing Options table below Ø 27.8 mm (1.09 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper tube Ø 12.8 mm (0.50 in)
Dielectric: Cellular polyethylene Ø 32.5 mm ( 1.28 in)
Outer conductor: Copper tape with periodic slots Ø 32.8 mm ( 1.29 in)
Fire barrier: Mica tape Ø 33.0 mm ( 1.30 in)
Jacket: See Jacketing Options table below Ø 38.8 mm ( 1.53 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Construction
Inner conductor: Copper tube Ø 12.8 mm (0.50 in)
Dielectric: Cellular polyethylene Ø 32.5 mm ( 1.28 in)
Outer conductor: Copper tape with periodic slots Ø 32.8 mm ( 1.29 in)
Fire barrier: Mica tape Ø 33.0 mm ( 1.30 in)
Jacket: See Jacketing Options table below Ø 38.8 mm ( 1.53 in)
Marking: Draka, cable type, manufacture week, year, batch number and meter mark
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Yapı
Bakır telden oluşan iletken üzerine, elektriksel özellikleri karşılayacak
kalınlıkta, VDE 0207 Part 2 02YI1’e uygun köpüklü PE yalıtkan damar üzerine
1 kat alüminyum kaplı polyester bant ekran sarılır. Üzerine kalaylı bakır
tellerden oluşan örgü ekran sarıldıktan sonra, siyah renkli VDE 0207 Part 5
YM1’e uygun PVC kılıf kaplanır. Kılıf yüzeyinin her iki tarafında sarı renkli çizgi
bulunur.
Teknik Bilgiler
Sabit koşullardaki sıcaklığı : -40 °C, +70 °C
Hareketli koşullardaki sıcaklığı : -5 °C, +50 °C
Kullanım Alanları
Bina içi CATV ve CTV dağıtım kablosu ve düşük zayıflama istenen SATV (Uydu
anten) sistemlerinde bağlantı kablosu olarak kullanılır.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Yapı
Bakır telden oluşan iletken üzerine, elektriksel özellikleri karşılayacak
kalınlıkta, VDE 0207 Part 2 02YI1’e uygun köpüklü PE yalıtkan damar üzerine
1 kat alüminyum kaplı polyester bant ekran sarılır. Üzerine kalaylı bakır
tellerden oluşan örgü ekran sarıldıktan sonra, siyah renkli IEC 60332-1 e uygun
LSOH kılıf kaplanır. Kılıf yüzeyinin her iki tarafında sarı renkli çizgi bulunur.
Teknik Bilgiler
Sabit koşullardaki sıcaklığı : -40 °C, +70 °C
Hareketli koşullardaki sıcaklığı : -5 °C, +50 °C
Kullanım Alanları
Bina içi CATV ve CTV dağıtım kablosu ve düşük zayıflama istenen SATV (Uydu
anten) sistemlerinde bağlantı kablosu olarak kullanılır.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.