Prysmian
7
You are here:
351 sonuçtan 17-32 arası gösteriliyor
Ürünler
Features and Benefits
• Full traceability and test certification supplied with each assembly.
• Ultra polish (UPC) supplied as standard and Angle polish (APC) also
available. Pigtails are un-tuned. Tuned pigtails are available on request.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS
compliant materials.
• Can be supplied with many different connector types such as FC, SC, ST,
E2000, LC, DIN and others on request.
• Available in singlemode and multimode (50/125 and 62.5/125).
• Standard fibre type supplied is singlemode G657A1 or multimode
OM1/OM2/OM3/OM4 and OM4 plus.
• Standard length supplied is 2 metres.
• Standard cable diameter is 900 micron with easy strip buffering.
Ruggedised pigtails can also be supplied in 1.6mm, 2mm and 3mm.
Contact Prysmian for further information.
• 900 micron pigtails are supplied in sets of 6 or 12 colours as standard.
• The fibres and the buffer are both coloured to ensure ease of
identification when stripped.
• All connectors are supplied with ceramic ferrules.
• Pre-installation of pigtails into Connectivity equipment is possible. See
relevant data sheets for further information.
Technical Data
–Singlemode (1310/1550nm)
• Maximum Insertion Loss (dB): ≤ 0.3 Typical 0.2 (UPC and APC)
• Return Loss (dB): ≥ 55 (UPC), ≥ 65 (APC)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
–Multimode (850nm)
• Maximum Insertion Loss (dB): ≤ 0.4 (UPC)
• Return Loss (dB): Not measured
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Full traceability and test certification supplied with each assembly.
• Ultra polish (UPC) supplied as standard and Angle polish (APC) also
available. Pigtails are un-tuned. Tuned pigtails are available on request.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS
compliant materials.
• Can be supplied with many different connector types such as FC, SC, ST,
E2000, LC, DIN and others on request.
• Available in singlemode and multimode (50/125 and 62.5/125).
• Standard fibre type supplied is singlemode G657A1 or multimode
OM1/OM2/OM3/OM4 and OM4 plus.
• Standard length supplied is 2 metres.
• Standard cable diameter is 900 micron with easy strip buffering.
Ruggedised pigtails can also be supplied in 1.6mm, 2mm and 3mm.
Contact Prysmian for further information.
• 900 micron pigtails are supplied in sets of 6 or 12 colours as standard.
• The fibres and the buffer are both coloured to ensure ease of
identification when stripped.
• All connectors are supplied with ceramic ferrules.
• Pre-installation of pigtails into Connectivity equipment is possible. See
relevant data sheets for further information.
Technical Data
Singlemode (1310/1550nm)
• Maximum Insertion Loss (dB): ≤ 0.3 Typical 0.2 (UPC and APC)
• Return Loss (dB): ≥ 55 (UPC), ≥ 65 (APC)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Multimode (850nm)
• Maximum Insertion Loss (dB): ≤ 0.4 (UPC)
• Return Loss (dB): Not measured
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Full traceability and test certification supplied with each assembly.
• Ultra polish (UPC) supplied as standard and Angle polish (APC) also
available. Patchcords are un-tuned. Tuned patchcords are available on
request.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS
compliant materials.
• Can be supplied with many different connector types such as FC, SC,
ST, E2000, LC, DIN and others on request.
• Available in singlemode and multimode (50/125 and 62.5/125).
• Many fibre types available including singlemode G657A1 or multimode
OM1/OM2/OM3,OM4 and OM4 plus.
• Lengths available from 1 metre to 99 metres.
• Cable diameters available in 1.2mm, 1.6mm, 2mm and 3mm.
• Various sheath colours available.
• All connectors are supplied with ceramic ferrules.
• Please contact Prysmian to discuss any special patchcord requirements.
Technical Data
Singlemode (1310/1550nm)
• Maximum Insertion Loss (dB): ≤ 0.3 Typical 0.2 (UPC and APC)
• Return Loss (dB): ≥ 55 (UPC), ≥ 65 (APC)
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Multimode (850nm)
• Maximum Insertion Loss (dB): ≤ 0.4 (UPC)
• Return Loss (dB): Not measured
• Intermateability: IEC 874-14
• Operating temperature: -40oC to + 85oC
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
Prysmian Part Numbers: See below
PLC Splitters
• Full traceability and test certification supplied with each assembly.
• Splitters with up to 64 output ports can be supplied.
• Designed to meet Telcordia GR1209 and GR1221 standards.
• Can be supplied with many different connector types such as FC, SC, ST,
E2000, LC and others on request.
• Advanced planar technology.
• Low loss and PDL.
• Can be pre-installed into Connectivity products such as joints,
distribution cabinets and wall boxes.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact, safe, easy to handle, typically used in multi
dwelling units or office fibre cabling systems.
• The Verticasa Cable Stripping tool (VCST) special design will
expose the cable elements without any damage to the fibres.
• With the dedicated adaptors supplied, the VCST is suitable
to be used with the 12,24 or 48fo Verticasa cables, measuring
8.5mm, 12.5mm and 14.5mm in diameter.
• For use only for cables with lateral GRP strength members
embedded in the sheath.
• The VCST is suitable to perform a window on a cable or to
strip the cable at a cable butt without any length limitations.
Technical Data
• Required space envelope (mm):
for the VCST: (h) 145 x (w) 30 x (d) 30
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Used to crimp a fibre module onto the pulling rope placed inside
the Verticasa Drop Tube. Can be used for one or two fibre
module(s).
• Used to crimp the 5mm crimp ring in a customer connection kit to
grip the 2mm cable to the tube.
• The Crimp pliers head has been designed to get the best grip
between the pulling rope and fibre(s).
• The nominal diameter for the micro tube is 1.95mm OD and
1.6mm ID. The tube has a 1mm slot for ease of module insertion.
The length of the tube is 5mm.
Technical Data
• Required space envelope (mm):
for the Crimp pliers: (h) 210x (w) 70 x (d) 20
for the spare Tubes: (h) 70 x (w) 100
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Smooth bore.
• Bend limitation at a controlled radius of 30mm.
• Suitable for protection of fibre and pigtails up to 2.8mm OD.
• Crush Protection.
• Improved fibre management
Technical Data
• Outer tube Diameter: 5.0mm
• Inner Tube Diameter: 3.1mm
• Segment Spacing: 4.0mm
• Crush Resistance: > 0.5kN (measured over 100mm)
• Distortion: < 0.5mm (measured over 100mm)
• Operating temperature: -20oC to + 40oC (5 to 95% RH)
• Material:- Polypropylene
• Finish:- White (Other Colours available on request)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Low Friction anti static bore.
• Reduced Fire Hazard Tube.
• Suitable for protection of fibre and pigtails up to 3.0mm OD.
• Crush Protection.
• Improved fibre management
Technical Data
• Outer tube Diameter: 5.0mm
• Inner Tube Diameter: 3.5mm
• Crush Resistance: >0.2kN
• Operating temperature: -20oC to + 40oC (5 to 95% RH)
• Material:- LSOH UL94 V0
• Finish:- White (Other Colours available on request)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
Prysmian Part Numbers: See below
FAST – Field Installable Connectors
• Quick, simple and clean solution for terminating SC connectors.
• Can be installed in less than 30 seconds, including preparation time.
• Available in SC/PC, LC/PC and SC/APC configurations.
• Dual terminating solution for 0.25mm and 0.9mm fibre diameters.
• No specialised tooling required. Connectors can be installed using
standard fibre preparation tools.
• Factory polished eliminating the need for extra materials and
reducing installation time.
• Supplied with a disposable wedge, already assembled to the main
connector housing.
• Stable optical performance is achieved through its use of V-groove
mechanical splice technology.
• The SC/PC and LC/PC connectors have an insertion loss of ≤0.4 dB,
with a return loss of ≥ 40dB for singlemode, and an insertion loss of
≤0.2 dB for multimode.
• The SC/APC connector has an insertion loss of ≤0.4 dB, with a
return loss of ≥ 65dB for singlemode, and an insertion loss of ≤0.2
dB for multimode
Technical Data
SC/PC Connector
Singlemode
• Maximum Insertion Loss (dB): ≤ 0.4
• Minimum Return Loss (dB): ≥ 40
• Ferrule: Factory Polished
Multimode
• Maximum Insertion Loss (dB): ≤ 0.2
• Minimum Return Loss (dB): N/A
• Ferrule : Factory Polished
SC/APC Connector
Singlemode
• Maximum Insertion Loss (dB): ≤ 0.4
• Minimum Return Loss (dB): ≥ 65
• Ferrule: Factory Polished
LC/PC Connector
Singlemode
• Maximum Insertion Loss (dB): ≤ 0.4
• Minimum Return Loss (dB): ≥ 40
• Ferrule: Factory Polished
Multimode
• Maximum Insertion Loss (dB): ≤ 0.2
• Minimum Return Loss (dB): N/A
• Ferrule: Factory Polished
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Low Friction tube with an anti static bore.
• Supplied with a pulling rope pre-installed for easy fibre
installation.
• Tube plugs are available to ensure access to the pulling
rope when cutting the drop tube into lengths.
• Available in internal and external formats. External
format is the internal tube with an extra polyethylene
sheath. See data sheet AC018.
• Reduced Fire Hazard Tube.
Technical Data
• Outer tube diameter: 5.0mm
• Inner tube diameter: 3.5mm
• Maximum Tensile: 80N
• Crush Rating: 0.4kN
• Impact: 1J
• Operating temperature: -20oC to + 40oC (5 to 95% RH)
• Material:- LSOH UL94 V0
• Finish:- White
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Used to temporarily store an extracted fibre module.
• Inner diameter of 180mm ensures fibre bend radius is not
compromised.
• The fibre module can be wound on the reel as its extracted
from the riser cable.
• Light weight plastic construction.
Technical Data
• Reel inner diameter: 180mm
• Reel flange diameter: 230mm
• Reel Height: 65mm
• Material: Polypropylene
• Finish:- Transparent
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Low friction tube with an anti static bore.
• Supplied with a pulling rope pre-installed for easy fibre
installation.
• Tube plugs are available to ensure access the pulling rope
when cutting the drop tube into lengths.
• External format is an internal tube with an extra
polyethylene sheath. A ripcord is installed between the
sheath and the tube for easy sheath removal.
• External sheath provides protection from the weather and is
UV stabilised.
Technical Data
• Outer diameter: 7.2mm
• Inner tube outer diameter: 5.0mm
• Inner tube inner diameter: 3.5mm
• Crush Resistance: > 0.4kN
• Operating temperature: -20oC to + 40oC (5 to 95% RH)
• Material:- LSOH UL94 V0 (inner tube) Polyethylene (outer sheath)
• Finish:- Black
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
Prysmian Part Number: XCPSC01047 (pack of 10)
Verticasa Bend Managers
• Used to control the bend radius of Internal Verticasa Drop Tubes.
• Bend Managers clip onto the 5mm tube.
• Can be used for a 90° internal or external bends, and also for pass through
the wall applications.
• Ensures fibre bend radius is not compromised.
• Eases fibre installation, especially for long drop lengths with multiple bends.
• Supplied with a cover for applications where the bend manager is used to
pass a tube through the wall.
Technical Data
• Guaranteed Bend Radius: 15mm
• Dimensions: 80mm (length) x 8.2mm (diameter)
• Material: FR ABS
• Colour: White RAL 9016
• Operating temperature: -40°C to +80°C
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Compact, safe, easy to handle, typically used in multi
dwelling units or office fibre cabling systems.
• The Verticasa Cable Stripping tool (VST-C) special design
will expose the cable elements without any damage to the
fibres.
• The VST-C is suitable to be used only on 7.5 to 9.0 mm OD
cables without GRP inside the sheath.
• The VST-C is suitable to perform a window on a cable or to
strip the cable at a cable butt without any length limitations.
Technical Data
• Required space envelope (mm):
for the VCST: (h) 160 x (w) 45 x (d) 12
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Heat shrink and mechanical crimp splice protectors available.
• Heat shrink splice protectors are available in sizes of 1.3mm,
2.2mm or 2.4mm in diameter after shrinkage. Other
diameters are also available on request.
• Heat shrink splice protectors are available in lengths of
30mm, 45mm or 60mm.
• Heath shrink splice protectors are made from polyolefin tube
with a hot melt adhesive glue.
• Heat shrink splice protectors contain a steel pin to ensure
even shrink down.
• Mechanical crimp splice protectors are 1.3mm thick x 3.3mm
in height x 30mm in length.
• Splice protectors are available in packs of 12 or 50.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• A plug and play system for TV cabling. No fibre training is required for
installation as no fusion or mechanical splicing is required.
• Floor boxes available for Tap Off or Splitter applications.
• A cascaded 16 user equalized configuration can be achieved.
• Miniaturized size. Floor boxes are compact and mini connector is less than
4mm in diameter. The cable diameter of patchcords is 2mm.
• Mini connector contains a pulling eye for installation into ducts.
• The standard fibre type supplied is G657A1 . (Other fibre types are available
on request)
• Mini to Mini patchcords are supplied in standard lengths of 3.5m, 5m and
10m. Other lengths are available on request.
• Mini to FC patchcords are available in standard lengths of up to 50m. Other
lengths available on request
• Sheath colour of patchcords is white. Sheath material is LSOH UV Stable.
• Qualified to Telcordia GR326 and IEC 61300 standards and RoHS compliant
materials.
• All connectors are supplied with ceramic ferrules.
• Full traceability and test certification supplied with each assembly.
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.