You are here:
6956 sonuçtan 4945-4960 arası gösteriliyor
Ürünler
Features and Benefits
• For the distribution of a Blown Tube cable of up to 24 tubes.
• Up to 24 single tube Blown Fibre cables can be distributed out.
• Fully removable front to allow easy access to the working area.
• Lockable front to prevent unwanted access.
• All tubes positively managed to a 50mm Ø to allow continuous blowing.
• Cables are anchored using 2 cable ties per cable.
• The cabinet is supplied with 24 x 5mm tube connectors.
• Designed for outdoor environments and fully compatible with Sirocco
Blown Fibre System.
• Cabinets are manufactured from 1.5mm galvanised steel.
Technical Data
• Number of cable ports: max 24 x 1 Tube cable or 1 x 24 Tube Cable
• Maximum cable diameter (mm): 40
• Required space envelope (mm):
Pole Mounted: (h) 720 x (w) 650 x (d) 535
Pedestal mounted: (h) 970 x (w) 650 x (d) 535
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Suitable for Blown Fibre and mini cable applications.
• Robust IP68 construction ensures suitability for direct bury applications.
• Quick release toggle clips reduce installation time and enable rapid reentry.
• Integral pressure relief valve prevents accidental over-pressurisation.
• For butt applications a plug is available to seal the unused end of the
in-line entry port.
• Can accommodate an in-line blown fibre tube cable/duct between
16.5mm and 40mm in diameter.
• Two further drop ports on each end can accommodate cables/ducts of
between 14.5mm and 24.5mm in diameter. Up to two small
cables/ducts between 10 and 11.5mm in diameter can also be
accommodated in each of these ports using a manifold. The manifold
can also be used to accommodate up to four cables into an end drop
port providing the cables are between 8 and 10mm in diameter.
• A further six drop ports (3 on each side) allow for cables/ducts between
8 and 11.5mm in diameter, or between 14.5 and 16.5mm in diameter.
• Drop cable glands are supplied separately. The closure has knock-out
ports for the glands, eliminating the need for plugs in unused ports. A
tool is available to knock-out the cable ports.
• The drop cable glands are designed to grip the cables/ducts in two
positions. This provides cable retention in both axial and lateral
directions. The glands also seal the cable/duct in two positions.
• The Tube Distribution Closure is supplied with an instruction flysheet. A
more detailed installation guide is available on request from Prysmian.
Technical Data
• Number of ports: 1×2 In-Line port, 4 End Ports, 6 Side Ports
• Blown Tube Cable Capacities:
(Based on cables containing 5mm tubes)
In-Line Port: 7, 12, 19 and 24 Blown Tube Cables
End Port: 4×1, 4, 7 and 12 Blown Tube Cables
Side Port: 1 and 4 Tube Cables
• Dimensions (mm): (l) 550 x (w) 290 x (d) 108
• Material:
Closure: GF Polypropylene (Black)
Toggles: GF Polypropylene (Orange)
Glands: Acetal (Black)
Seal: Rubber (Black)
• Testing:-
Dry heat: BS EN 60068-2-2 Test Bb
Damp heat: IEC 68-2-3
Temperature: IEC 68-2-14
Vibration: IEC 60068-2-6: 1995
Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Used for connecting two pieces of DB1 Blown Tube cable together.
• Suitable for direct bury applications.
• Sealed to IP68 using a low temperature heat shrink.
• The joint is protected using a 20mm diameter conduit.
• Standard 5-5mm tube connector is used to join the two cables together.
Technical Data
• Maximum Cable Diameter (mm): 16
• Maximum no of tube connections: 1
• IP Rating: 68
• Required space envelope (mm): (l) 250 x (Ø) 22
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Can accommodate an in-line Verticasa cable of up to 13mm in diameter.
• Can accommodate drop tubes of up to 7.2mm in diameter.
• Easy to install mechanical system sealing system using Gel to provide a seal
of IP67.
• UV resistant for external use.
• Non craft sensitive and reliable.
• Re-enterable and re-usable.
Technical Data
• Maximum Cable Diameter (mm): 13 (in-line), 7.2 (drop)
• Maximum no of Cable Entries: 1 (in-line), 2 (drop)
• IP Rating: 67
• Required space envelope (mm): (l) 185 x (w) 50 x (d) 50
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• The system is designed for one-man customer connection using
semi-skilled labour, thus significantly reducing the cost of subscriber
connections.
• Up to 8 pre-connectorised QUICKDR@W Lead-in Assemblies MK 3
can be individually installed into the lead-in seal ports.
• Deferred installation cost through incremental customer connection.
• Skilled labour required for initial CLJ installation in the distribution
phase. Subsequent lead-in cable connections require only minimal
training.
• The joint can be supplied with SC type adapters and pigtails preinstalled for single fibre applications, or LC type adapters and
pigtails pre-installed for dual fibre applications.
• The CLJ can also be supplied with pre-installed connectorised
passive splitters (1×8 or 1×16).
• The joint allows the storage of a continuous loop of loose tube cable
elements within the dedicated storage area at the front of the
closure.
• All fibres are positively managed to a 30mm bend radius.
• The closure base contains one oval port, eight lead-in seal ports
and two circular ports for spurs from the main cable loop.
• The CLJ closure is sealed to IP68.
• The CLJ is compatible with a range of Prysmian produced optical
cables which can be used to distribute the fibres to each unit.
Please contact Prysmian to discuss your specific requirements.
Technical Data
• Number of cable ports: 8 (Lead-in Seal), 1 (Oval), 2 (circular)
• Maximum cable diameter (mm): 7 (Lead-in Seal), 21 (Oval), 12 (circular)
• Maximum splice tray capacity: 1 (16 fibres), 1 upgrade (additional 24)
• Maximum capacity: 8 customer connection cables (1f or 2f each)
• Maximum loop capacity: 48 (4 x 12 fibre elements)
• Required space envelope (mm): (l) 300 x (w) 231 x (d) 164 (length 410mm when heat shrink applied)
• Operating temperature: -20oC to + 70oC (5 to 95% RH)
• Sealing: IP68
• Material:-
• Cap: Glass Filled Polypropylene
• Base: Glass Filled Polypropylene
• Splice tray: FR HIPS
• Testing:-
• Closure sealing: IP68 – AS60529-2004 IEC60529 Ed 2.1 2001
• Optical: Tested at 1310nm, 1383nm, 1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Suitable for 1 to 4 tube Blown Fibre applications.
• Suitable for use in ducted networks or direct-buried applications.
• IP68 rating.
• Compact size.
• The application of these joints provides a block to the longitudinal
passage of water within a cable.
• Once the resin has cured the joint can be re-entered to re-configure
the tube arrangement.
Technical Data
• Number of cable ports: 2 – 3 (depending upon configuration)
• Maximum cable diameter (mm): 25
• Maximum number of ports: 3
• Maximum tube capacity: 4
• Operating temperature: -20oC to + 60oC
• Material:-
• Joint Shells High Density Polythene
• Resin Polyurethane
• Testing:-
• Closure Sealing IP68
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Has a capacity of up to 38 splice trays.
• Can accommodate single element splice trays or customer locking splice
trays which contain several tube loops to lock the fibre elements.
• Can accommodate splitters and splitter assemblies (SASA’s).
• Splice trays hinge upwards individually, allowing full access to spliced
fibres without disturbance to live fibres in adjacent trays.
• Contains an oval port and a Loop Storage facility. The oval port can
accommodate cables up to 10mm in diameter. Cables are sealed into the
oval port using resin.
• Contains six circular ports, which can accommodate a 25mm flexible
conduit to protect the incoming blown fibre tubes. The conduit and tubes
are sealed into the ports using resin.
• All fibres are positively managed to maintain a 25mm minimum bend
radius within the joint.
• The Joint is sealed to IP68.
• Supplied in several configurations. Each type is identified by different
colour toggles so there is no need to open the closure to determine which
version is installed. See kit contents and part numbers for the different
configurations.
• For use with Blown fibre tube cables.
Technical Data
• Number of cable ports: 1 Oval (can be used for a Loop), 6 Circular.
• Maximum cable diameter (mm): 10 Oval, a 25mm conduit Circular
• Maximum number of splice trays: 38
• Required space envelope (mm): (w) 210 x (h) 560 x (d) 165.
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Base & Cover : Polypropylene (Black)
• Splice trays: FR HIPS (Light Grey)
• Toggles: 20% Glass Filled Polypropylene (Orange, Green, Blue)
• Port Bungs: 20% Glass Filled Polypropylene (Black)
• Testing:-
• Closure sealing: IP68
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Small compact snap fit single piece closure for connecting ducts / tubes.
• Two 7mm ports for connecting the 7mm duct.
• One 4mm branch port for spurring of fibres through a 4mm duct.
• Can be used to cut an existing 7mm duct and re-connect it mechanically
whilst leaving the fibres passing through in tact. The required fibres can
then be accessed, retracted and spurred off into a 4mm branch duct.
• For mechanical connection only. The unit is not sealed.
Technical Data
• Required space envelope (mm): (w) 66 x (h) 36 x (d) 25 mm
• Material: Polypropylene 10% GF
• Colour: Natural (semi Transparent)
• Duct Pull Out Retention:
> 40N (7mm port)
> 15N (4mm port)
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Can accommodate an in-line RetractaNet cable from 10mm to 15mm in
diameter.
• Can accommodate two drop tubes / cables of up to 10mm in diameter.
• Easy to install mechanical system using Gel to provide a seal to IP68.
• Suitable for direct buried applications.
• Impact and crush resistant.
• For underground use only.
• Non craft sensitive and reliable.
Technical Data
• Dimensions 190 x 72 x 32 mm
• Colour Black
• Material Polypropylene
• Temperature range:
• Transport and storage -10ºC to +50ºC
• Installation -10ºC to +50ºC
• Operation -20ºC to +60ºC
• Number of Cable Entries: 1 in-line, 2 Drops
• In Line Cable Diameter (mm): 10.0 to 15.0
• Drop Cable Diameter (mm): 6.0 to 10.0
• Fibre bending radius (mm): minimum 15 (ITU-T G.657 A2 fibre)
• Cable retention: 15 mm cable: 350 N
7 mm drop tube: 150 N
• Water immersion: IP68 (No water ingress at 1 meter water pressure for 7 days)
• Impact resistance 10 Nm @ 20 ºC, radius 200 mm
• Crush resistance 1000 N @ 20 ºC on top surface of the box
• Application area Group 1 according to EN 124, placed minimum 25 cm below surface level
Group 2 according to EN 124, placed minimum 30 cm below stone or concrete pavement
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Designed for the splicing of OPGW cables.
• The joint box can accommodate 8 splice trays with each splice able to
accommodate up to 24 splices providing a maximum capacity of 192 fibre
splices.
• The joint box can be supplied with either 2, 3 or 4 cable entries and can
accommodate cables with a diameter of up to 25mm.
• The joint box can accommodate cables with plastic sheath, OPGW with
aluminium tube (multi loose tube or single loose tube), OPGW with stainless
steel tube or OPGW with stainless steel embedded aluminium tube.
• OPGW cables are sealed into the joint box using cable glands and a heavy
walled heat shrink tube. Plastic sheathed cables are sealed using heavy walled
heat shrink tube.
• The joint box can be anchored to the tower with galvanised steel clamps,
allowing the fixation to any type of tower. It can be anchored to all types of
poles using stainless steel tape.
• The external box is made of aluminium alloy and is sealed to IP67.
• The standard colour is RAL 7042.
Technical Data
• Maximum number of cable entries: 4
• Maximum Cable Diameter (mm): 25
• Maximum number of splice trays: 8
• Maximum number of splices per tray: 24
• Maximum number of splices: 192
• IP Rating: IP67
• Required space envelope (mm): (l) 319 x (w) 219 x (d) 110.
• Operating temperature: -40oC to + 85oC
• Material:-
• Joint Box: Aluminium alloy with grey coated powder (RAL 7042)
• Fastening Structure: Aluminium and galvanised steel
• Nuts and Bolts: Stainless Steel
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Each joint is supplied with 2 pre-fitted splice trays each capable of
containing up to 48 spliced fibres.
• Each joint is supplied with 96 mini heat-shrink splice protectors.
• The closure base has 6 circular entry ports, four of them factory fitted with
5 meters of flexduct to feed through the cable fibre modules. The
maximum capacity of each flexduct is 24 Retractanet fibre modules with 2
fibres each or 12 feeder cable loose tubes 1.55 mm with 12 fibres each.
• All flexducts are sealed using adhesive lined heat-shrink sleeves. The base
entry ports are pre-shot blasted and configured with easy knock out ends,
eliminating the need for cutting and abrading.
• The joints are supplied with all of the components required to prepare,
install and store the fibres of one 96 fibre feeder cable and 3 Retractanet
cables.
• Additional flexducts can be installed into the circular ports of the joint
using Retractanet flexduct kits.
Technical Data
• Number of cable ports: 6 circular; inner port diameter 25 mm
• Maximum capacity each port: 24x Retractanet 2 fibre modules or 12x 12 fibre loose tubes 1.55 mm
• Maximum number of splice trays: 2 (48 splices each)
• Maximum fibre capacity of Joint: 96 fibre
• Required space envelope (mm): (l) 390 x (w) 231 x (d) 164
(Length = 500mm when heat shrink sleeve is installed)
• Transport and storage -10°C to + 50°C
• Installation temperature -10°C to + 50°C
• Operating temperature: -40°C to + 70°C (5 to 95% RH)
• Material:
• Cap: Polypropylene
• Base: Phenolic resin
• Splice trays: Coated aluminium
• Testing:
• Closure sealing: IP68 – BT specification LN450B
• Optical: Tested 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987
• Impact resistance: 10 Nm @ 20 ºC, radius 200 mm
• Crush resistance: 1000 N/10 cm @ 20 ºC on dome
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• For all RetractanetXS cables and cable combinations up to 18 mm.
• Watertight IP68.
• Tension relief on RetractanetXS cable and RetractanetXS fibre modules.
• Direct buried application.
• Crush and impact resistant.
Technical Data
• Number of cable ports: Single version: 1 port on each side
Multiple version: combinations of 1, 3 or 6 ports
• Cable retention 18 mm cable: 400 N
15 mm cable: 330 N
6 mm cable: 25 N
• Fibre module retention 1.25 mm fibre module: 25 N
• Crush resistance 1000N/10 cm @ 20°C
• Impact resistance 10 Nm @ 20°C, radius 200 mm
• Water immersion IP68 (no water ingress at 5 meter water pressure for 7 days)
• Application area Group 1 in accordance with EN 124, 25 cm below surface level
• Temperature range Transport & storage: -10°C – +50°C (short term < 14 days)
+10°C - +35°C (long term)
Installation -10°C - +50°C
Processing temperature +10°C - +35°C (2 component resin)
Operation -20°C - +60°C
● Curing time Installation after 5 minutes, completely cured after 30 minutes
● Dimensions Single version: (l) 240 mm x (w) 25 mm x (d) 25 mm
Multiple version: (l) 200 mm x (w) 40 mm x (d) 40 mm
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Can accommodate an in-line cable of up to 13mm in diameter.
• Ideal for the Retractanet cable range (with extractable fibre elements).
• Can accommodate four drop cables of up to 9mm in diameter.
• Has a facility to splice and hold 16 splice protectors on a dedicated splice tray.
• Easy to install mechanical system using Gel to provide a seal to IP68.
• The closure can be-re-entered.
• Suitable for cable chamber applications.
•Impact and crush resistant.
• For use underground
• Non craft sensitive and reliable.
• Available in grey or black.
Technical Data
• Number of cable ports: 4 circular and 1 inline port
• Maximum cable diameter (mm): 13mm for the inline cable – 9mm for the drop cables
• Maximum number of splice trays: 1
• Maximum fibre capacity of Joint: 16
• Required space envelope (mm): 220 x 95 x 35mm
• Operating temperature: -25oC to + 70oC (5 to 95% RH)
• Material: Polypropylene
• Colour: Black or Grey
• Testing:-
• Closure sealing: IP68
• Fibre bending radius (mm): minimum 15 (ITU-T G.657 A2 fibre)
• Cable retention: IEC 61300-2-4 [4]
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
up to 24t DB or DI SiroccoXS cable.
pre-configured micro-duct cables up to 40mm.
• Drop Port can accept:
3 x DB1 SiroccoXS cables
1 x DB2 SiroccoXS cable
• Allows Individual Tube Breakout and tube re-routing.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 200 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• In-line Ports can accept up to:
40mm sub-duct.
pre-configured micro-duct cables up to 40mm.
• Interception of part populated mini/micro-duct cable is possible.
• Sealing to IP41
Technical Data
• Maximum sub-duct diameter: 40mm
• Dimensions: (L) 260 x (W) 100 x (D) 100mm
• Operating temperature: -40oC to + 70oC
• Material: High Density Polythene
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
Features and Benefits
• Universal closure for direct buried, hand hole/manhole, and pole/tower
(ADSS, OPGW) installation.
• Acid proof stainless steel housing for harsh and corrosive environments
without any additional protection.
• High crush and impact resistance.
• Maximum capacity up to 192 splices (XOK 103 series) and 336 splices (XOK
107 series). By extension collars or splice trays for fibre ribbons the capacity
can be increased up to 1000 splices.
• A number of configurations with round and oval cable entry ports.
• A number of configurations suitable for window-cut applications.
• Heat shrink or mechanical type cable entry port seals provide excellent water
tightness and high cable pull out strength.
• Extension collars for extended capacity available.
• Non craft sensitive and reliable.
• Water tight seal to IP68.
Technical Data
• Dimensions (excl. inlet tubes): XOK 103 series: 560 x 230 x 100 mm
XOK 107 series: 560 x 230 x 140 mm
XOK A3 and A4: 560 x 230 x 140 mm
• Inner Diameter of Entry Ports: XOK 103 series: round port 20 mm, oval port 58 x 28 mm
XOK 107 series: round port 27 mm, oval port 58 x 28 mm
XOK A3 and A4: oval port 58 x 28 mm
• Material: Closure: Acid Proof Stainless Steel (AISI 316) 1.5 mm
Closure Seal: Chloroprene Rubber
• Splice Tray Capacity XOK 103 series: 4 trays XOKP 1024/48 with 48 splices each (192 splices)
XOK 107 series: 7 trays XOKP 1024/48 with 48 splices each (336 splices)
XOK A3 and A4: 4 trays XOKP 1024/48 with 48 splices each (192 splices)
• Temperature Variation IEC 60068-2-14; 2 cycles -30°C to +80°C: Δα <0.1 dB@1550 nm
• Damp Heat IEC 60068-2-14; + 60°C, RV 93%, 16 h: Δα <0.1 dB@1550 nm
• Climatic Withstand Test: IEC 60068-2-14; heat +85°C; RV 93%;16 h: Δα <0.1 dB@1550 nm
IEC 60068-2-14; cold -30°C; 16 h: Δα <0.1 dB@1550 nm
• Corrosion Test A Sulphur Dioxide: EN ISO 7384, ISO 3231; +40°C; RV saturated; SO2 0,067% by volume; 3x 120 h
• Corrosion Test B Salty Mist: IEC 60068-2-52; +35°C; 1000 h
• Temperature Range:
• Transport and Storage -40ºC to +50ºC
• Installation -10ºC to +50ºC
• Operation -45ºC to +80ºC
• Fibre Bending Radius (mm) Minimum 30 mm
• Cable Retention IEC 60794-1-E1: 1000 N
• Water Immersion IP68 (No water ingress at 1 meter water pressure for 7 days)
• Impact Resistance IEC 60794-1-E4: 30 Nm @ 20 ºC, radius 300 mm
• Crush Resistance 1000 N @ 20 ºC on top surface of the box
• Torsion Resistance IEC 60794-1-E7: 1000 mm length, ± 180°: Δα <0.1 dB@1550 nm
• Drop Drop height 5 meters on concrete: Δα <0.1 dB@1550 nm
• Application Area Group 1&2 in accordance with EN 124, 30 cm below surface level
Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.
