Features and Benefits
• Provides management of fibres through Splicing and
Patching.
• Splicing and bare fibre excess storage is performed inside a
splice tray protected by a cover.
• Compatible with 19” and ETSI racks.
• Supplied with 72 Adapters and pigtails pre-installed onto
the splice trays ready for connection to cable fibres.
• The shelf can accommodate a variety of different connector
types.
• Shelf pulls outwards to enable easy access to the splice
trays.
• Modules hinge upwards to provide access to the module
below.
• compatible with the OAsys Modular Main Rack.
• Fully bend managed to 30mm minimum bend radius.

Technical Data
• Max number of Adapters: 72
• Max number of Splices: 72
• Required space envelope (mm): 19” – (w) 415 x (d) 280 x (h) 133.5
ETSI – (w) 495 x (d) 280 x (h) 133.5
• Operating temperature: -20oC to + 50oC (5 to 95% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: FR Polymer
• Finish:-
• Metalwork: Painted light grey (RAL 7035)
• Plastics: Grey
• Testing:-
• Optical: Tested at 1310nm and 1550nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• High density low cost compact design for up to 48 fibres.
• Compatible with SC, FC, E2000, LC, ST connecter types.
• Cables anchor on the rear of the unit using a cable anchor plate supplied.
• Unit manufactured from high strength fire retardant plastic to give a light
weight solution.
• Supplied either as an empty unit, in kit format (with pigtails and adapters
in a bag) for installer loading, or with the pigtails and adapters pre-installed
by Prysmian.
• All fibres are positively managed to a 30mm minimum bend radius.
• Shelf pivots out to for access to the splice tray and pigtail area.
• Shelf can be used as a patch only solution and allows excess cable lengths
to be stored.
• Stackable splice bay allows for easy upgrade of splicing capacity.
• The shelf offers the ability to terminate up to 2 cables and allows through
splicing of fibres.
• Compatible with Sirocco blown fibre cables using a Blown Fibre Manifold.
The manifold enables up to 6 blown fibre tubes to be routed to a single
shelf.
• Available in 2 colours – grey RAL 7035 and black.

Technical Data
• No of splice trays: 1
• Maximum fibre capacity 24 (ST, FC, E2000)
48 (SC, LC)
• Max. Cable Diameter (mm): 18
• Cable capacity: 2
• Required space envelope (mm): (w) 481 x (d) 230 x (h) 44
• Operating temperature: -20o
C to + 50o
C (5 to 95% RH)
• Material: High Impact Polystyrene (Fire Retardant)
• Colour: Light Grey RAL 7035 or Black
• Testing:
• Optical: Tested at 1310nm and 1550nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 68-2-3
• Change of temperature IEC 68-2-14
• Vibration: IEC 68-2-6
• Shock: IEC 68-2-27

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
ƒ Modular system for installation into 19” / ETSI / ANSI racks, street-side
cabinets and wall mounted cabinets.
ƒ The sub-rack can be supplied fully configured or modules can be supplied
empty for upgrading at a later date.
ƒ Chassis are available in 1U, 2U and 3U options are supplied front
mounted as standard. Rear mounting brackets are available as an option.
ƒ Fibres are actively managed to minimum bend diameters throughout the
Splicing and Patching, Patching only, Splicing only, Patchcord Storage and
Splitter Modules.
ƒ Splicing and bare fibre excess storage is performed inside a tray
protected by a cover to prevent any accidental damage when open &
closing the shelves.
ƒ Modules pivot outwards for easy access.
ƒ Cables are completely protected from entry to exit of the panel.
ƒ Optical devices (i.e. Splitters & WDM’s) can be mounted within the
modules. Please contact Prysmian to discuss your requirements)
ƒ Wall mount 19” and ETSI cabinets are also available. Please contact
Prysmian for further details.
ƒ Modules have drop down fronts for easier patchcord routing, enclosing
patch-cords, and protecting adapters.
ƒ 2 large labelling areas provided for identification recording per module.

Technical Data
• Max number of splices
• 1U 48 ( SC & LC), 24 ( FC, ST & E2000)
• 2U 96 (SC & LC), 48 (FC, ST & E2000)
• 3U 144 (SC & LC), 72 (FC, ST & E2000)
• Max number of output patchcords:
• 1U 48 with 2mm diameter patch cords
• 2U 96 with 2mm diameter patch cords
• 3U 144 with 2mm diameter patch cords
• Max Cable Diameter (mm): 14
• Required space envelope (mm):
• 1U: (w) 480 x (d) 245 x (h) 44.5
• 2U (w) 480 x (d) 245 x (h) 89.0
• 3U (w) 480 x (d) 245 x (h) 133.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Suitable for installation into 19”/ ETSI / ANSI racks, wall mounted
cabinets and street-side cabinets.
• The shelf has a capacity of up to 48 fibre splices.
• The shelf is supplied with splice protector holders for 2.2mm heat
shrink splice protectors. Crimp splice protectors can also be
accommodated by using crimp splice protector holders. Refer to
additional items.
• Can accommodate most cable types including blown fibre tube cables.
• Splice module pivots outwards for easy fibre access and maintenance.
• The shelf can be used for optical splitters and other passive devices in
alternative configurations. Please contact Prysmian for further
information.
• The drop down front panel prevents accidental disconnection of fibre
routing tubes during installations.
• All fibres are positively bend managed to a 30mm radius
• Supplied with a large cover label and front panel labels for easy
identification and data recording.
• Splice bay is covered with a detachable lid (secured with two screws)
to protect the fibres once installed.

Technical Data
• Max number of splices 48
• Splice protectors accommodated: 2.2mm heat shrink or crimp
• Max number of output patchcords: 48 with 2mm diameter patch cords
• Max Cable Diameter: 14mm
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• High density cost effective design for housing connectorised splitters in racks
or cabinets.
• Compatible with all connecter types.
• Dedicated input and output positions for the splitter legs.
• Unit manufactured from high strength fire retardant plastic to give a light
weight solution.
• Supplied with connectorised splitters pre-installed by Prysmian. The number
of splitters per shelf depends on the configuration and connector type. The
part number tables on pages 2 to 4 show all of the configurations possible.
• All fibres are positively managed to a 30mm minimum bend radius.
• Shelf pivots out to enable access to the splitter storage area for maintenance.
• Ideal for high density FTTH applications with Passive Optical Networks (PON).
• Can be mounted in racks, wall cabinets and street-side cabinets.
• Compatible with the SRS3000 product range.
• Patch cord are bend managed for extra protection.
• Note: for shelves totalling more than 24 patch cords (input + output) 2mm patch cords
must be used

Technical Data
• Max number of outputs: 32
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted Light Grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested 1310nm,1550nm and 1625nm
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• Eliminates the need for splicing. The shelf is supplied with pre-installed
MPO or MTP fan-outs for simple connection using pre-terminated cables.
•The shelf can be supplied with up to four 12f MPO or MTP fan-outs preinstalled.
• High patch density of 48 adapters in SC or LC configurations.
• Suitable for installation into 19”/ ETSI / ANSI racks, wall mounted cabinets
and street side cabinets.
• Patch module pivots outwards for easy fibre access and maintenance..
• The drop down front panel prevents accidental disconnection of patchcords and provides additional space for patchcord routing during
installations.
• All fibres are positively bend managed to a 30mm radius
• Supplied with a large cover label and front panel labels for easy
identification and data recording.
• Patch bay is covered with a detachable lid (secured with two screws) to
protect the fibres once installed.
• Can accommodate most cable types including blown fibre tube cables.
Note: for 48f 1U shelves a 2mm Patch-cord size should be used.

Technical Data
• Max number of terminations: 48 – SC or LC
4 x 12F MPO or MTP Fan-Outs
Max number of output patchcords: 48 (2mm diameter patch cords)
• Max Cable Diameter: 14mm
• Required space envelope (mm): (w) 480 x (d) 245 x (h) 44.5
• Operating temperature: -20oC to + 60oC (5 to 93% RH)
• Material:-
• Metalwork: Mild Steel
• Plastics: High Impact Polystyrene
• Finish:-
• Metalwork: Painted light grey RAL 7035
• Plastics: Light Grey RAL 7035
• Testing:-
• Optical: Tested at 1310nm,1550nm and 1625nm
• Dry heat: BS EN 60068-2-2 Test Bb
• Damp heat: IEC 60068-2-3: 1969
• Change of temperature: IEC 60068-2-14: 1984
• Vibration: IEC 60068-2-6: 1995
• Shock: IEC 60068-2-27: 1987

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• The MEB144 is a robust metallic shelf that can be mounted in racks for
indoor applications or street cabinets for outdoor applications.
• Fits into standard 19” rails. Can be used in ETSI racks or cabinets using
conversion brackets. Contact Prysmian for further details.
• The shelf is equipped with a metallic cover.
• The shelf is equipped with a 144fo front patch panel.
• The patch panel contains 12 columns of 12 single SC connector
positions.
• The shelf is equipped with six 24fo splice trays.
• A drop down front panel protects and guides the patchcords.
• The pivoting support can fix up to nine 5mm OD tubes/cables.
• The shelf is 4U in height.

Technical Data
• Number of cable ports: 9
• Maximum cable diameter (mm): 5
• Maximum number of splice trays: 6
• Patch capacity 144 SC type connectors
• Maximum fibre capacity : 144 (24fo x 6)
• Required space envelope (mm): 19″ x 275mm (d) (240+35mm) H=4U (178mm)
• Operating temperature: -25oC to + 70oC (5 to 95% RH)
• Material: Mild Steel, Painted light grey RAL 7035
• Testing:
• Optical: Tested 1310nm,1550nm and 1625nm
• Fibre bending radius (mm): Minimum 15mm (ITU-T G.657 A2 fibre)
• Cable retention: IEC 61300-2-4 [4]
• Thermal choc IEC 61300-2-22 [12]
• Corrosion test IEC 60068-2-11 [5]
• Vibration test IEC 61300-2-1 Ed3 [2] .
• Cable retention IEC 61300-2-4 [4] .
• Torsion test IEC 61300-2-5 Ed3 [5]
• Flexion test IEC 61300-2-37 Ed2 [13]
• Shock IEC 61300-2-9 Ed 2.0 [7]
• Crush test IEC 61300-2-10
• Fall test IEC 61300-2-12 [8]
• Temp. cycling EN 61300-2-22[12]

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.

Features and Benefits
• The POB36 is a robust metallic shelf that can be mounted in racks for indoor
applications or street cabinets for outdoor applications.
• Fits into standard 19” rails. Can be used in ETSI racks or cabinets using
conversion brackets. Contact Prysmian for further details.
• The shelf is equipped with a metallic cover.
• The shelf is equipped with a 36fo front patch panel.
• The patch panel contains 3 rows of 12 single SC/APC connector positions.
• The shelf is equipped with three 12fo splice trays.
• A drop down front panel protects and guides the patchcords.
• The pivoting support can fix up to three 5mm OD tubes/cables.
• The shelf is 1U in height.
• Each tray is suitable a for planar splitter up to 1/8

Technical Data
• Number of cable ports: 3
• Maximum cable diameter (mm): 5
• Maximum number of splice trays: 3
• Patch capacity 36 SC type connectors
• Maximum fibre capacity : 36 (12fo x 3)
• Required space envelope (mm): 19″ x 275mm (d) (240+35mm) H= 1U (44.4mm)
• Operating Temperature: -25oC to + 70oC (5 to 95% RH)
• Material: Mild Steel Painted light grey RAL 7035
• Testing:
• Optical: Tested 1310nm,1550nm and 1625nm
• Fibre bending radius (mm): Minimum 15mm (ITU-T G.657 A2 fibre)
• Cable retention: IEC 61300-2-4 [4]
• Thermal choc IEC 61300-2-22 [12]
• Corrosion test IEC 60068-2-11 [5]
• Vibration test IEC 61300-2-1 Ed3 [2] .
• Cable retention IEC 61300-2-4 [4] .
• Torsion test IEC 61300-2-5 Ed3 [5]
• Flexion test IEC 61300-2-37 Ed2 [13]
• Shock IEC 61300-2-9 Ed 2.0 [7]
• Crush test IEC 61300-2-10
• Fall test IEC 61300-2-12 [8]
• Temp. cycling EN 61300-2-22[12]

Ürün teknik özellik ve detayları için PDF ikonuna tıklayarak detayları görüntüleyebilir, dosyayı indirebilir veya istediğiniz adrese mail yolu ile ulaştırabilirsiniz.